Hi Laszlo,
I'm trying to PXE boot Windows 7 within OVMF. According the README under OvmfPkg, I should run the QEMU command with '-vga std' or '-vga qxl': Current capabilities: ... * UEFI Linux boots * UEFI Windows 8 boots * UEFI Windows 7 & Windows 2008 Server boot (see important notes below!) ... * One of the '-vga std' and '-vga qxl' QEMU options should be used. * Only one video mode, 1024x768x32, is supported at OS runtime. * The '-vga qxl' QEMU option is recommended. After booting the installed guest OS, select the video card in Device Manager, and upgrade its driver to the QXL XDDM one. Download location: <http://www.spice-space.org/download.html>, Guest | Windows binaries. This enables further resolutions at OS runtime, and provides S3 (suspend/resume) capability. But after PXE downloaded the install image and run into OS phase(So, it's not related to PXE), the QEMU screen is always black, never show anything (Both '-vga std' and '-vga qxl'). I also tried the PXE boot to windows 10, the bluescreen happened during OS phase (Even is not declared to boot win10 in README). MyQEMU command is attached as below: sudo qemu-system-x86_64 \ -vga std \ -machine q35 \ -m 8192 \ -hda /var/qemuDisk/vd1 \ -pflash OVMF.fd \ -global e1000.romfile=""\ \ -netdev tap,id=hostnet0,ifname=tap0,script=no,downscript=no \ -device e1000,netdev=hostnet0 Notes: vd1 is created by: dd if=/dev/zero of=/var/qemuDisk/vd1 seek=1M bs=20480 count=1 Do you know why? Thanks and Best Regards! Jiaxin _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
