Hi Rocky,

Thanks for providing the iSCSI setup details.
I shall try and let you know if I have any questions.

Thank you
Naveen

-----Original Message-----
From: Ni, Xingrong [mailto:[email protected]] 
Sent: Tuesday, July 18, 2017 6:51 AM
To: Santhapur Naveen; Ye, Ting; [email protected]
Cc: Liu, Jiang A
Subject: RE: iSCSI Setup in Linux

Hi Naveen,

Here is an Iscsi setup simple guider in SUSE SLES11sp3, you can try it and let 
me know if any question. 

Step1:  install iscsitarget on suse
              #zypper in iscsitarget

Step2: Setup an iSCSI target
             1:  Preparing the Storage space
              #mkdir /srv/iscsi
              #dd if=/dev/zero of=/srv/iscsi/disk1.img bs=1M count=4000

             2: Configuring an iSCSI target manually
                #gedit /etc/ietd.conf     (Delete original ited.conf, then 
create an ited.conf only contain below statement)
                 Target iqn.tiano.com:iscsi1
                  Lun 0 Path=/srv/iscsi/disk1.img,Type=fileio

             3: Restart iSCSI target server  #service iscsitarget restart

             4: Check Iscsi target server status #service iscsitarget status


Thanks & Best Wishes!
Rocky


-----Original Message-----
From: Santhapur Naveen [mailto:[email protected]] 
Sent: Friday, July 7, 2017 7:42 PM
To: Ye, Ting <[email protected]>; [email protected]
Subject: RE: iSCSI Setup in Linux

Hi Ting,

I'm open to use any flavor of Linux (Ubuntu, SLES or Redhat...).
Please let me know If there's one such document.

Thank you
Naveen

-----Original Message-----
From: Ye, Ting [mailto:[email protected]] 
Sent: Friday, July 07, 2017 12:58 PM
To: Santhapur Naveen; [email protected]
Subject: RE: iSCSI Setup in Linux

Hi Naveen,

May I know which Linux OS are you using to run iSCSI target? I think there are 
different iSCSI targets available in Linux.

Thanks,
Ting

-----Original Message-----
From: edk2-devel [mailto:[email protected]] On Behalf Of 
Santhapur Naveen
Sent: Thursday, July 06, 2017 4:45 PM
To: [email protected]
Subject: [edk2] iSCSI Setup in Linux

Hi all,

Is there any document explaining the iscsi target configuration in linux OSes.
I've googled and most of the links are not working for me.
Is there's any open document available, would someone point me the url?

Thank you
Naveen
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to