On Wed, Aug 09, 2017 at 12:39:57PM -0700, Michael D Kinney wrote: > The following commit moved the QuarkSocBinPkg from the root > directory to the the Silicon/Intel directory. > > https://github.com/tianocore/edk2-non-osi/commit/182e85d04566800fe188de4b1c30a50533dd74b7 > > The following updates are made to Readme.md: > > * PACKAGES_PATH setting for edk2-non-osi directory changes > * Remove use of edk2-FatPkg repository > * Remove use of edk2-BaseTools-win32 repository > * Run python build tools from sources
I don't think you need my r-b on this, but I appreciate the cc. If I was nitpicking, I would point out there are three logically unrelated changes going on here. However, since it all consist of updates to a single documentation file, the only change I would request would be to the subject line to say something a bit broader like "bring Readme.md up to date". With that: Reviewed-by: Leif Lindholm <leif.lindh...@linaro.org> > Cc: Leif Lindholm <leif.lindh...@linaro.org> > Cc: Kelly Steele <kelly.ste...@intel.com> > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Michael D Kinney <michael.d.kin...@intel.com> > --- > QuarkPlatformPkg/Readme.md | 34 ++++++++++++++++++---------------- > 1 file changed, 18 insertions(+), 16 deletions(-) > > diff --git a/QuarkPlatformPkg/Readme.md b/QuarkPlatformPkg/Readme.md > index f925f9ef27..aa9d9856bd 100644 > --- a/QuarkPlatformPkg/Readme.md > +++ b/QuarkPlatformPkg/Readme.md > @@ -46,12 +46,12 @@ > - Install > * ASL compiler: Available from http://www.acpica.org > - Install into ```C:\ASL``` to match default tools_def.txt configuration. > +* Python 2.7: Available from http://www.python.org > > Create a new directory for an EDK II WORKSPACE. > > The code block below shows the GIT clone operations required to pull the EDK > II > -source tree, the FatPkg sources, the pre-built versions of BaseTools as WIN32 > -binaries, and the edk2-non-osi repository that provides a binary file for the > +source tree and the edk2-non-osi repository that provides a binary file for > the > Quark Remote Management Unit (RMU). > > Next it sets environment variables that must be set before running > @@ -60,6 +60,8 @@ the EDK II [Multiple Workspace]( > https://github.com/tianocore/tianocore.github.io/wiki/Multiple_Workspace) > feature is used. > > +Next, the EDK II BaseTools required to build firmware images are built. > + > Next, the ```edksetup.bat``` file is run to complete the initialization of an > EDK II build environment. Two example build commands are shown. The first > one > in ```QuarkPlatformPlg/Quark.dsc``` builds a full UEFI firmware image that is > @@ -69,16 +71,17 @@ image that is useful for initial power-on and debug of > new features. > > ```cmd > git clone https://github.com/tianocore/edk2.git > -git clone https://github.com/tianocore/edk2-FatPkg.git FatPkg > -git clone https://github.com/tianocore/edk2-BaseTools-win32.git > git clone https://github.com/tianocore/edk2-non-osi.git > > +set PYTHON_HOME=c:\Python27 > set WORKSPACE=%CD% > -set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-non-osi > -set EDK_TOOLS_BIN=%WORKSPACE%\edk2-BaseTools-win32 > +set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-non-osi\Silicon\Intel > +set EDK_TOOLS_PATH=%WORKSPACE%\edk2\BaseTools > +cd %WORKSPACE%\edk2 > > -cd edk2 > -edksetup.bat > +BaseTools\toolsetup.bat Rebuild > + > +edksetup.bat Rebuild > > build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/Quark.dsc > build -a IA32 -t VS2015x86 -p QuarkPlatformPkg/QuarkMin.dsc > @@ -91,12 +94,13 @@ build -a IA32 -t VS2015x86 -p > QuarkPlatformPkg/QuarkMin.dsc > * GIT client > * GCC 4.9 compiler > * ASL compiler: Available from http://www.acpica.org. > +* Python 2.7 > > Create a new directory for an EDK II WORKSPACE. > > The code block below shows the GIT clone operations required to pull the EDK > II > -source tree, the FatPkg sources, and the edk2-non-osi repository that > provides a > -binary file for the Quark Remote Management Unit (RMU). > +source tree and the edk2-non-osi repository that provides a binary file for > the > +Quark Remote Management Unit (RMU). > > Next it sets environment variables that must be set before running > ```edksetup.bat```. Since content is being pulled from multiple repositories, > @@ -106,7 +110,7 @@ feature is used. > > Next, the EDK II BaseTools required to build firmware images are built. > > -Next, the ```edksetup.bat``` file is run to complete the initialization of an > +Next, the ```edksetup.sh``` file is run to complete the initialization of an > EDK II build environment. Two example build commands are shown. The first > one > in ```QuarkPlatformPlg/Quark.dsc``` builds a full UEFI firmware image that is > able to boot the built-in UEFI Shell and Linux from a micro SD FLASH card. > The > @@ -115,17 +119,15 @@ image that is useful for initial power-on and debug of > new features. > > ```sh > git clone https://github.com/tianocore/edk2.git > -git clone https://github.com/tianocore/edk2-FatPkg.git FatPkg > git clone https://github.com/tianocore/edk2-non-osi.git > > export WORKSPACE=$PWD > -export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-non-osi > +export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-non-osi/Silicon/Intel > export EDK_TOOLS_PATH=$WORKSPACE/edk2/BaseTools > - > -make -C edk2/BaseTools > - > cd $WORKSPACE/edk2 > > +make -C BaseTools > + > . edksetup.sh BaseTools > > build -a IA32 -t GCC49 -p QuarkPlatformPkg/Quark.dsc > -- > 2.13.1.windows.2 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel