Hello All, Could you please help in clarifying below question on ISCSI behavior.
2 ISCSI Attempts are added with different configuration Case 1: Attempt 1------Enabled(ISCSI Mode)------IP4-----DHCP ---> In Valid Attempt (In Valid Target Details) Attempt 2------Enabled(ISCSI Mode)------IP4-----DHCP ---> Valid Attempt Result:- -> Initiator IP Assigned for Attempt1 and Attempt2(2 times DHCP process done) ->ISCSI connection success with Attempt2 and same Details was found in Shell Case 2: Attempt 1------Enabled for MPIO(ISCSI Mode)------IP4-----DHCP ---> In Valid Attempt (In Valid Target Details) Attempt 2------Enabled for MPIO(ISCSI Mode)------IP4-----DHCP ---> Valid Attempt Result:- -> Initiator IP Assigned for Attempt1 and Attempt2(2 times DHCP process done) ->ISCSI connection success with Attempt2 and same Details was found in Shell Note: Same behavior seen with adding attempts for 2 different MAC addresses 1. What is the difference between ISCSI Mode Enable & Enabled for MPIO ? Because irrespective of ISCSI Mode, Attempt2 will be processed if Attempt1 is In Valid Thanks, karunakar _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
