This change will create the possibility for memory space holding the UEFI image to be over-written by the DXE core code, since this space will then be available for allocation. Any such change, if required, should be done just before booting the OS.
-----Original Message----- From: edk2-devel [mailto:[email protected]] On Behalf Of Meenakshi Aggarwal Sent: Tuesday, September 19, 2017 6:02 PM To: [email protected]; [email protected]; [email protected] Subject: [edk2] [PATCH v2] PeiLib : Inform UEFI memory to Linux While creating Hob list, ArmPlatformPkg is hiding UEFI memory. whereas this memory can be used by OS. This patch, allows OS to use UEFI code area. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Udit Kumar <[email protected]> Signed-off-by: Meenakshi Aggarwal <[email protected]> --- ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.c | 69 ------------------------- 1 file changed, 69 deletions(-) diff --git a/ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.c b/ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.c index 2feb11f..d03214b 100644 --- a/ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.c +++ b/ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.c @@ -70,11 +70,7 @@ MemoryPeim ( { ARM_MEMORY_REGION_DESCRIPTOR *MemoryTable; EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttributes; - UINT64 ResourceLength; EFI_PEI_HOB_POINTERS NextHob; - EFI_PHYSICAL_ADDRESS FdTop; - EFI_PHYSICAL_ADDRESS SystemMemoryTop; - EFI_PHYSICAL_ADDRESS ResourceTop; BOOLEAN Found; // Get Virtual Memory Map from the Platform Library @@ -121,71 +117,6 @@ MemoryPeim ( ); } - // - // Reserved the memory space occupied by the firmware volume - // - - SystemMemoryTop = (EFI_PHYSICAL_ADDRESS)PcdGet64 (PcdSystemMemoryBase) + (EFI_PHYSICAL_ADDRESS)PcdGet64 (PcdSystemMemorySize); - FdTop = (EFI_PHYSICAL_ADDRESS)PcdGet64 (PcdFdBaseAddress) + (EFI_PHYSICAL_ADDRESS)PcdGet32 (PcdFdSize); - - // EDK2 does not have the concept of boot firmware copied into DRAM. To avoid the DXE - // core to overwrite this area we must mark the region with the attribute non-present - if ((PcdGet64 (PcdFdBaseAddress) >= PcdGet64 (PcdSystemMemoryBase)) && (FdTop <= SystemMemoryTop)) { - Found = FALSE; - - // Search for System Memory Hob that contains the firmware - NextHob.Raw = GetHobList (); - while ((NextHob.Raw = GetNextHob (EFI_HOB_TYPE_RESOURCE_DESCRIPTOR, NextHob.Raw)) != NULL) { - if ((NextHob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) && - (PcdGet64 (PcdFdBaseAddress) >= NextHob.ResourceDescriptor->PhysicalStart) && - (FdTop <= NextHob.ResourceDescriptor->PhysicalStart + NextHob.ResourceDescriptor->ResourceLength)) - { - ResourceAttributes = NextHob.ResourceDescriptor->ResourceAttribute; - ResourceLength = NextHob.ResourceDescriptor->ResourceLength; - ResourceTop = NextHob.ResourceDescriptor->PhysicalStart + ResourceLength; - - if (PcdGet64 (PcdFdBaseAddress) == NextHob.ResourceDescriptor->PhysicalStart) { - if (SystemMemoryTop == FdTop) { - NextHob.ResourceDescriptor->ResourceAttribute = ResourceAttributes & ~EFI_RESOURCE_ATTRIBUTE_PRESENT; - } else { - // Create the System Memory HOB for the firmware with the non-present attribute - BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY, - ResourceAttributes & ~EFI_RESOURCE_ATTRIBUTE_PRESENT, - PcdGet64 (PcdFdBaseAddress), - PcdGet32 (PcdFdSize)); - - // Top of the FD is system memory available for UEFI - NextHob.ResourceDescriptor->PhysicalStart += PcdGet32(PcdFdSize); - NextHob.ResourceDescriptor->ResourceLength -= PcdGet32(PcdFdSize); - } - } else { - // Create the System Memory HOB for the firmware with the non-present attribute - BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY, - ResourceAttributes & ~EFI_RESOURCE_ATTRIBUTE_PRESENT, - PcdGet64 (PcdFdBaseAddress), - PcdGet32 (PcdFdSize)); - - // Update the HOB - NextHob.ResourceDescriptor->ResourceLength = PcdGet64 (PcdFdBaseAddress) - NextHob.ResourceDescriptor->PhysicalStart; - - // If there is some memory available on the top of the FD then create a HOB - if (FdTop < NextHob.ResourceDescriptor->PhysicalStart + ResourceLength) { - // Create the System Memory HOB for the remaining region (top of the FD) - BuildResourceDescriptorHob (EFI_RESOURCE_SYSTEM_MEMORY, - ResourceAttributes, - FdTop, - ResourceTop - FdTop); - } - } - Found = TRUE; - break; - } - NextHob.Raw = GET_NEXT_HOB (NextHob); - } - - ASSERT(Found); - } - // Build Memory Allocation Hob InitMmu (MemoryTable); -- 1.9.1 _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
