Hi Karunakar, We agree to add this feature for the Initiator info of IPv4 when DHCP enabled. Can you report it on Bugzilla first?
To achieve that, we can grayout the Initiator IP/Subnet/Gateway if Initiator DHCP enabled to indicate it's un-configurable. For IPv6, since iSCSI only request the target info from DHCP server, so, it's unnecessary to display the info as IPv4. Thanks, Jiaxin From: Karunakar P [mailto:[email protected]] Sent: Friday, October 6, 2017 5:28 PM To: '[email protected]' <[email protected]> Cc: Fu, Siyuan <[email protected]>; Wu, Jiaxin <[email protected]>; Ye, Ting <[email protected]> Subject: RE: Request to display Initiator IP in ISCSI Attempt Page Hello All, We have a requirement to display Initiator IP in ISCSI Configuration Page when Initiator info is enabled for DHCP, find detailed description below. 1. Add an Attempt with Initiator info Enabled for DHCP 2. Save changes 3. On next reboot, Previously added ISCSI attempt will be tried and ISCSI DHCP server will assign an IP to the client (Initiator IP). 4. It is better to display Initiator IP in same attempt Page like below Ex:- Initiator IP : 192.168.0.5 // DHCP Process was success Initiator IP : 0.0.0.0 // DHCP process failed Could you please provide your comments to support this feature? Thanks, Karunakar _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
