Given that all changes to the first file _remove_ comments, it may be better with a subject line saying "updating comments".
On Tue, Sep 26, 2017 at 09:15:12PM +0100, evan.ll...@arm.com wrote: > From: Girish Pathak <girish.pat...@arm.com> > > There is no functional modification in this change > As preparation for a Change (Rejig of LcdGraphicsOutPutDxe), some > comments are modified and a few new comments are added. > This is to prevent mixing formatting changes with functional > changes. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Girish Pathak <girish.pat...@arm.com> > Signed-off-by: Evan Lloyd <evan.ll...@arm.com> > --- > ArmPlatformPkg/Include/Library/LcdPlatformLib.h > | 80 +++++++++++++++----- > ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c > | 63 ++++++++++++++- > > ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c > | 68 ++++++++++++++++- > ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c > | 20 +++++ > ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c > | 4 +- > ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c > | 22 +++++- > 6 files changed, 231 insertions(+), 26 deletions(-) > > diff --git a/ArmPlatformPkg/Include/Library/LcdPlatformLib.h > b/ArmPlatformPkg/Include/Library/LcdPlatformLib.h > index > 72ebcd02ddb321ee0dad51c87ac8ee876d9ca21c..48bdd8a51411137df040aa797fcff272785f7a35 > 100644 > --- a/ArmPlatformPkg/Include/Library/LcdPlatformLib.h > +++ b/ArmPlatformPkg/Include/Library/LcdPlatformLib.h > @@ -18,9 +18,7 @@ Is this where one of the stray copyright updates from 1/19 should go? > > #define LCD_VRAM_SIZE SIZE_8MB > > -// > // Modes definitions > -// > #define VGA 0 > #define SVGA 1 > #define XGA 2 > @@ -29,9 +27,7 @@ > #define UXGA 5 > #define HD 6 > > -// > // VGA Mode: 640 x 480 > -// > #define VGA_H_RES_PIXELS 640 > #define VGA_V_RES_PIXELS 480 > #define VGA_OSC_FREQUENCY 23750000 /* 0x016A6570 */ > @@ -44,9 +40,7 @@ > #define VGA_V_FRONT_PORCH ( 3 - 1) > #define VGA_V_BACK_PORCH ( 13 - 1) > > -// > // SVGA Mode: 800 x 600 > -// > #define SVGA_H_RES_PIXELS 800 > #define SVGA_V_RES_PIXELS 600 > #define SVGA_OSC_FREQUENCY 38250000 /* 0x0247A610 */ > @@ -59,9 +53,7 @@ > #define SVGA_V_FRONT_PORCH ( 3 - 1) > #define SVGA_V_BACK_PORCH ( 17 - 1) > > -// > // XGA Mode: 1024 x 768 > -// > #define XGA_H_RES_PIXELS 1024 > #define XGA_V_RES_PIXELS 768 > #define XGA_OSC_FREQUENCY 63500000 /* 0x03C8EEE0 */ > @@ -74,9 +66,7 @@ > #define XGA_V_FRONT_PORCH ( 3 - 1) > #define XGA_V_BACK_PORCH ( 23 - 1) > > -// > // SXGA Mode: 1280 x 1024 > -// > #define SXGA_H_RES_PIXELS 1280 > #define SXGA_V_RES_PIXELS 1024 > #define SXGA_OSC_FREQUENCY 109000000 /* 0x067F3540 */ > @@ -89,9 +79,7 @@ > #define SXGA_V_FRONT_PORCH ( 3 - 1) > #define SXGA_V_BACK_PORCH ( 29 - 1) > > -// > // WSXGA+ Mode: 1680 x 1050 > -// > #define WSXGA_H_RES_PIXELS 1680 > #define WSXGA_V_RES_PIXELS 1050 > #define WSXGA_OSC_FREQUENCY 147000000 /* 0x08C30AC0 */ > @@ -104,9 +92,7 @@ > #define WSXGA_V_FRONT_PORCH ( 4 - 1) > #define WSXGA_V_BACK_PORCH ( 41 - 1) > > -// > // UXGA Mode: 1600 x 1200 > -// > #define UXGA_H_RES_PIXELS 1600 > #define UXGA_V_RES_PIXELS 1200 > #define UXGA_OSC_FREQUENCY 161000000 /* 0x0998AA40 */ > @@ -119,9 +105,7 @@ > #define UXGA_V_FRONT_PORCH ( 3 - 1) > #define UXGA_V_BACK_PORCH ( 38 - 1) > > -// > // HD Mode: 1920 x 1080 > -// > #define HD_H_RES_PIXELS 1920 > #define HD_V_RES_PIXELS 1080 > #define HD_OSC_FREQUENCY 165000000 /* 0x09D5B340 */ > @@ -134,10 +118,7 @@ > #define HD_V_FRONT_PORCH ( 3 - 1) > #define HD_V_BACK_PORCH ( 32 - 1) > > -// > // Colour Masks > -// > - > #define LCD_24BPP_RED_MASK 0x00FF0000 > #define LCD_24BPP_GREEN_MASK 0x0000FF00 > #define LCD_24BPP_BLUE_MASK 0x000000FF > @@ -171,34 +152,85 @@ typedef enum { > LCD_BITS_PER_PIXEL_12_444 > } LCD_BPP; > > - > +/** Platform related initialization function. > + * > + * @param IN Handle Handle to the LCD device instance. > + * > + * @retval EFI_SUCCESS Platform initialization success. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ So ... 6.8 lists /** text **/ as the The format /** * text **/ is mentioned as "also legal because doxygen ignores the leading *". The format /** * **/ is never mentioned, although I guess "also legal" because * ignored. However, a quick skim in MdePkg suggests the former is the generally used variant. Can you please update to that format throughout (drop the leading '*' on lines not starting or ending the comment block)? No other comments (other than having these prototype documentations are a great improvement). / Leif > EFI_STATUS > LcdPlatformInitializeDisplay ( > IN EFI_HANDLE Handle > ); > > +/** Reserve VRAM memory in DRAM for the frame buffer > + * (unless it is reserved already). > + * > + * The allocated address can be used to set the frame buffer. > + * @param OUT VramBaseAddress A pointer to the frame buffer address. > + * @param OUT VramSize A pointer to the size of the frame > + * buffer in bytes > + * > + * @retval EFI_SUCCESS Frame buffer memory allocation success. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ > EFI_STATUS > LcdPlatformGetVram ( > OUT EFI_PHYSICAL_ADDRESS* VramBaseAddress, > OUT UINTN* VramSize > ); > > +/** Return total number of modes. > + * > + * @retval UINT32 Mode Number. > +**/ > UINT32 > LcdPlatformGetMaxMode ( > VOID > ); > > +/** Set the requested display mode. > + * > + * @param IN ModeNumber Mode Number. > + * @retval EFI_SUCCESS Set mode success. > + * @retval EFI_INVALID_PARAMTER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformSetMode ( > IN UINT32 ModeNumber > ); > > +/** Return information for the requested mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT Info Pointer for returned mode information > + * (on success). > + * > + * @retval EFI_SUCCESS Success if the requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformQueryMode ( > IN UINT32 ModeNumber, > OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info > ); > > +/** Returns the display timing information for the requested mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT HRes Pointer to horizontal resolution. > + * @param OUT HSync Pointer to horizontal sync width. > + * @param OUT HBackPorch Pointer to horizontal back porch. > + * @param OUT HFrontPorch Pointer to horizontal front porch. > + * @param OUT VRes Pointer to vertical resolution. > + * @param OUT VSync Pointer to vertical sync width. > + * @param OUT VBackPorch Pointer to vertical back porch. > + * @param OUT VFrontPorch Pointer to vertical front porch. > + > + * @retval EFI_SUCCESS Success if the requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformGetTimings ( > IN UINT32 ModeNumber, > @@ -212,6 +244,14 @@ LcdPlatformGetTimings ( > OUT UINT32* VFrontPorch > ); > > +/** Return bits per pixel information for a mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT Bpp Pointer to value Bytes Per Pixel. > + * > + * @retval EFI_SUCCESS The requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformGetBpp ( > IN UINT32 ModeNumber, > diff --git > a/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c > > b/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c > index > 2041de5f63c72de6f0ce4047420c282507a1d04a..cfe3259d3c737de240350e8c3eab867b80c40948 > 100644 > --- > a/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c > +++ > b/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c > @@ -44,7 +44,8 @@ typedef struct { > UINT32 VFrontPorch; > } LCD_RESOLUTION; > > - > +/** The display modes supported by the platform. > +**/ > LCD_RESOLUTION mResolutions[] = { > { // Mode 0 : VGA : 640 x 480 x 24 bpp > VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24, > @@ -94,6 +95,11 @@ EFI_EDID_ACTIVE_PROTOCOL mEdidActive = { > NULL > }; > > +/** HDLCD Platform specific initialization function. > + * > + * @retval EFI_SUCCESS Plaform library initialization success. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ > EFI_STATUS > LcdPlatformInitializeDisplay ( > IN EFI_HANDLE Handle > @@ -124,6 +130,18 @@ LcdPlatformInitializeDisplay ( > return Status; > } > > +/** Reserve VRAM memory in DRAM for the frame buffer > + * (unless it is reserved already). > + * > + * The allocated address can be used to set the frame buffer. > + * > + * @param OUT VramBaseAddress A pointer to the frame buffer address. > + * @param OUT VramSize A pointer to the size of the frame > + * buffer in bytes > + * > + * @retval EFI_SUCCESS Frame buffer memory allocation success. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ > EFI_STATUS > LcdPlatformGetVram ( > OUT EFI_PHYSICAL_ADDRESS* VramBaseAddress, > @@ -170,6 +188,13 @@ LcdPlatformGetVram ( > return EFI_SUCCESS; > } > > +/** Return total number of modes supported. > + * > + * Note: Valid mode numbers are 0 to MaxMode - 1 > + * See Section 11.9 of the UEFI Specification 2.6 Errata A (Jan 2017) > + * > + * @retval UINT32 Mode Number. > +**/ > UINT32 > LcdPlatformGetMaxMode(VOID) > { > @@ -178,6 +203,10 @@ LcdPlatformGetMaxMode(VOID) > return (sizeof (mResolutions) / sizeof (LCD_RESOLUTION)); > } > > +/** Set the requested display mode. > + * > + * @param IN ModeNumber Mode Number. > +**/ > EFI_STATUS > LcdPlatformSetMode ( > IN UINT32 ModeNumber > @@ -227,6 +256,15 @@ LcdPlatformSetMode ( > return Status; > } > > +/** Return information for the requested mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT Info Pointer for returned mode information > + * (on success). > + * > + * @retval EFI_SUCCESS Success if the requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformQueryMode ( > IN UINT32 ModeNumber, > @@ -267,6 +305,21 @@ LcdPlatformQueryMode ( > return EFI_SUCCESS; > } > > +/** Returns the display timing information for the requested mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT HRes Pointer to horizontal resolution. > + * @param OUT HSync Pointer to horizontal sync width. > + * @param OUT HBackPorch Pointer to horizontal back porch. > + * @param OUT HFrontPorch Pointer to horizontal front porch. > + * @param OUT VRes Pointer to vertical resolution. > + * @param OUT VSync Pointer to vertical sync width. > + * @param OUT VBackPorch Pointer to vertical back porch. > + * @param OUT VFrontPorch Pointer to vertical front porch. > + * > + * @retval EFI_SUCCESS Success if the requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformGetTimings ( > IN UINT32 ModeNumber, > @@ -296,6 +349,14 @@ LcdPlatformGetTimings ( > return EFI_SUCCESS; > } > > +/** Return bits per pixel for a mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT Bpp Pointer to value Bits Per Pixel. > + * > + * @retval EFI_SUCCESS The requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformGetBpp ( > IN UINT32 ModeNumber, > diff --git > a/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c > > b/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c > index > 8d046816454f642bced00e29c4e02093b74afd24..84880e5fd1dfe6f824b27e53926f9bb32ff6cdf7 > 100644 > --- > a/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c > +++ > b/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c > @@ -41,7 +41,8 @@ typedef struct { > UINT32 VFrontPorch; > } LCD_RESOLUTION; > > - > +/** The display modes supported by the platform. > +**/ > LCD_RESOLUTION mResolutions[] = { > { // Mode 0 : VGA : 640 x 480 x 24 bpp > VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24, > @@ -151,7 +152,11 @@ EFI_EDID_ACTIVE_PROTOCOL mEdidActive = { > NULL > }; > > - > +/** PL111 Platform specific initialization function. > + * > + * @retval EFI_SUCCESS Plaform library initialization success. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ > EFI_STATUS > LcdPlatformInitializeDisplay ( > IN EFI_HANDLE Handle > @@ -176,6 +181,18 @@ LcdPlatformInitializeDisplay ( > return Status; > } > > +/** Reserve VRAM memory in DRAM for the frame buffer > + * (unless it is reserved already). > + * > + * The allocated address can be used to set the frame buffer. > + * > + * @param OUT VramBaseAddress A pointer to the frame buffer address. > + * @param OUT VramSize A pointer to the size of the frame > + * buffer in bytes > + * > + * @retval EFI_SUCCESS Frame buffer memory allocation success. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ > EFI_STATUS > LcdPlatformGetVram ( > OUT EFI_PHYSICAL_ADDRESS* VramBaseAddress, > @@ -232,6 +249,13 @@ LcdPlatformGetVram ( > return Status; > } > > +/** Return total number of modes supported. > + * > + * Note: Valid mode numbers are 0 to MaxMode - 1 > + * See Section 11.9 of the UEFI Specification 2.6 Errata A (Jan 2017) > + * > + * @retval UINT32 Mode Number. > +**/ > UINT32 > LcdPlatformGetMaxMode(VOID) > { > @@ -249,6 +273,14 @@ LcdPlatformGetMaxMode(VOID) > return (PcdGet32 (PcdPL111LcdMaxMode)); > } > > +/** Set the requested display mode. > + * > + * @param IN ModeNumber Mode Number. > + * > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > + * @retval EFI_UNSUPPORTED PLL111 configuration not supported. > + * @retval !(EFI_SUCCESS) Other errors. > +**/ > EFI_STATUS > LcdPlatformSetMode ( > IN UINT32 ModeNumber > @@ -320,6 +352,15 @@ LcdPlatformSetMode ( > return Status; > } > > +/** Return information for the requested mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT Info Pointer for returned mode information > + * (on success). > + * > + * @retval EFI_SUCCESS Success if the requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformQueryMode ( > IN UINT32 ModeNumber, > @@ -360,6 +401,21 @@ LcdPlatformQueryMode ( > return EFI_SUCCESS; > } > > +/** Returns the display timing information for the requested mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT HRes Pointer to horizontal resolution. > + * @param OUT HSync Pointer to horizontal sync width. > + * @param OUT HBackPorch Pointer to horizontal back porch. > + * @param OUT HFrontPorch Pointer to horizontal front porch. > + * @param OUT VRes Pointer to vertical resolution. > + * @param OUT VSync Pointer to vertical sync width. > + * @param OUT VBackPorch Pointer to vertical back porch. > + * @param OUT VFrontPorch Pointer to vertical front porch. > + * > + * @retval EFI_SUCCESS Success if the requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformGetTimings ( > IN UINT32 ModeNumber, > @@ -389,6 +445,14 @@ LcdPlatformGetTimings ( > return EFI_SUCCESS; > } > > +/** Return bits per pixel for a mode number. > + * > + * @param IN ModeNumber Mode Number. > + * @param OUT Bpp Pointer to value Bits Per Pixel. > + * > + * @retval EFI_SUCCESS The requested mode is found. > + * @retval EFI_INVALID_PARAMETER Requested mode not found. > +**/ > EFI_STATUS > LcdPlatformGetBpp ( > IN UINT32 ModeNumber, > diff --git a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c > b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c > index > eb0b6fb3fbbc1cb605469433f6c6dcb85bac668c..744dd3d556b5071defc6bcad5a9a30881bcb4b6f > 100644 > --- a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c > +++ b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c > @@ -29,6 +29,12 @@ > * > **********************************************************************/ > > +/** Initialize display. > + * > + * @param VramBaseAddress Address of the frame buffer. > + * > + * @retval EFI_SUCCESS Display initialization success. > +**/ > EFI_STATUS > LcdInitialize ( > IN EFI_PHYSICAL_ADDRESS VramBaseAddress > @@ -67,6 +73,12 @@ LcdInitialize ( > return EFI_SUCCESS; > } > > +/** Set requested mode of the display. > + * > + * @param ModeNumber Display mode number. > + * @retval EFI_SUCCESS Display set mode success. > + * @retval EFI_DEVICE_ERROR If mode not found/supported. > +**/ > EFI_STATUS > LcdSetMode ( > IN UINT32 ModeNumber > @@ -136,6 +148,8 @@ LcdSetMode ( > return EFI_SUCCESS; > } > > +/** De-initializes the display. > +**/ > VOID > LcdShutdown ( > VOID > @@ -145,6 +159,12 @@ LcdShutdown ( > MmioWrite32 (HDLCD_REG_COMMAND, HDLCD_DISABLE); > } > > +/** Check for presence of HDLCD. > + * > + * @retval EFI_SUCCESS Platform implements HDLCD. > + * @retval EFI_NOT_FOUND HDLCD display controller not > + * found. > +**/ > EFI_STATUS > LcdIdentify ( > VOID > diff --git > a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c > b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c > index > 2dd8f39873f77b1c211bff407cabe90c1795b121..c40c8e0fa6f4b5f7798aeb3c8bf3f261f14cb67b > 100644 > --- a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c > +++ b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c > @@ -357,8 +357,8 @@ LcdGraphicsSetMode ( > goto EXIT; > } > > - // The UEFI spec requires that we now clear the visible portions of the > - // output display to black. > + /* The UEFI spec requires that we now clear the visible portions of the > + * output display to black. */ > > // Set the fill colour to black > SetMem (&FillColour, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL), 0x0); > diff --git a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c > b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c > index > 0b0c4204fbc44bc9e90dce3d7b410ce167d9f40c..f8a3c1f8266c0a11f111c3747688defc0d49877c > 100644 > --- a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c > +++ b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c > @@ -26,6 +26,12 @@ > * > **********************************************************************/ > > +/** Check for presence of PL111. > + * > + * @retval EFI_SUCCESS Platform implements PL111. > + * @retval EFI_NOT_FOUND PL111 display controller not > + * found. > +**/ > EFI_STATUS > LcdIdentify ( > VOID > @@ -48,6 +54,12 @@ LcdIdentify ( > return EFI_NOT_FOUND; > } > > +/** Initialize display. > + * > + * @param VramBaseAddress Address of the frame buffer. > + * > + * @retval EFI_SUCCESS Display initialization success. > +**/ > EFI_STATUS > LcdInitialize ( > IN EFI_PHYSICAL_ADDRESS VramBaseAddress > @@ -63,6 +75,12 @@ LcdInitialize ( > return EFI_SUCCESS; > } > > +/** Set requested mode of the display. > + * > + * @param ModeNumber Display mode number. > + * @retval EFI_SUCCESS Display set mode success. > + * @retval EFI_DEVICE_ERROR If mode not found/supported. > +**/ > EFI_STATUS > LcdSetMode ( > IN UINT32 ModeNumber > @@ -123,7 +141,7 @@ LcdSetMode ( > > // PL111_REG_LCD_CONTROL > LcdControl = PL111_CTRL_LCD_EN | PL111_CTRL_LCD_BPP (LcdBpp) > - | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR; > + | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR; > > MmioWrite32 (PL111_REG_LCD_CONTROL, LcdControl); > > @@ -134,6 +152,8 @@ LcdSetMode ( > return EFI_SUCCESS; > } > > +/** De-initializes the display. > +*/ > VOID > LcdShutdown ( > VOID > -- > Guid("CE165669-3EF3-493F-B85D-6190EE5B9759") > > _______________________________________________ > edk2-devel mailing list > edk2-devel@lists.01.org > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel