On 10/19/17 04:42, Eric Dong wrote:
> MicrocodeDetect function will run by every threads, and it will
> use PcdGet to get PcdCpuMicrocodePatchAddress and
> PcdCpuMicrocodePatchRegionSize, if change both PCD default to dynamic,
> system will in non-deterministic behavior.
>
> By design, UEFI/PI services are single threaded and not re-entrant
> so Multi processor code should not use UEFI/PI services. Here, Pcd
> protocol/PPI is used to access dynamic PCDs so it would result in
> non-deterministic behavior.
>
> This code get PCD value in BSP and save them in CPU_MP_DATA for Ap.
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=726
>
> Cc: Crystal Lee <[email protected]>
> Cc: Ruiyu Ni <[email protected]>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Dong <[email protected]>
> ---
> UefiCpuPkg/Library/MpInitLib/Microcode.c | 10 +++-------
> UefiCpuPkg/Library/MpInitLib/MpLib.c | 2 ++
> UefiCpuPkg/Library/MpInitLib/MpLib.h | 2 ++
> 3 files changed, 7 insertions(+), 7 deletions(-)
Eric, can you please fix up the subject line after you get an R-b and
are about to push the patch?
-UefiCpuPkg/MpInitLib: Avoid call PcdGe* in Ap & Bsp.
+UefiCpuPkg/MpInitLib: Avoid call PcdGet* in Ap & Bsp.
Thanks!
Laszlo
> diff --git a/UefiCpuPkg/Library/MpInitLib/Microcode.c
> b/UefiCpuPkg/Library/MpInitLib/Microcode.c
> index 982995b..35f66f7 100644
> --- a/UefiCpuPkg/Library/MpInitLib/Microcode.c
> +++ b/UefiCpuPkg/Library/MpInitLib/Microcode.c
> @@ -42,8 +42,6 @@ MicrocodeDetect (
> IN CPU_MP_DATA *CpuMpData
> )
> {
> - UINT64 MicrocodePatchAddress;
> - UINT64 MicrocodePatchRegionSize;
> UINT32 ExtendedTableLength;
> UINT32 ExtendedTableCount;
> CPU_MICROCODE_EXTENDED_TABLE *ExtendedTable;
> @@ -61,9 +59,7 @@ MicrocodeDetect (
> VOID *MicrocodeData;
> MSR_IA32_PLATFORM_ID_REGISTER PlatformIdMsr;
>
> - MicrocodePatchAddress = PcdGet64 (PcdCpuMicrocodePatchAddress);
> - MicrocodePatchRegionSize = PcdGet64 (PcdCpuMicrocodePatchRegionSize);
> - if (MicrocodePatchRegionSize == 0) {
> + if (CpuMpData->MicrocodePatchRegionSize == 0) {
> //
> // There is no microcode patches
> //
> @@ -93,8 +89,8 @@ MicrocodeDetect (
>
> LatestRevision = 0;
> MicrocodeData = NULL;
> - MicrocodeEnd = (UINTN) (MicrocodePatchAddress + MicrocodePatchRegionSize);
> - MicrocodeEntryPoint = (CPU_MICROCODE_HEADER *) (UINTN)
> MicrocodePatchAddress;
> + MicrocodeEnd = (UINTN) (CpuMpData->MicrocodePatchAddress +
> CpuMpData->MicrocodePatchRegionSize);
> + MicrocodeEntryPoint = (CPU_MICROCODE_HEADER *) (UINTN)
> CpuMpData->MicrocodePatchAddress;
> do {
> //
> // Check if the microcode is for the Cpu and the version is newer
> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> index 924b909..f3ee6d4 100644
> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> @@ -1458,6 +1458,8 @@ MpInitLibInitialize (
> CpuMpData->SwitchBspFlag = FALSE;
> CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);
> CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData +
> MaxLogicalProcessorNumber);
> + CpuMpData->MicrocodePatchAddress = PcdGet64
> (PcdCpuMicrocodePatchAddress);
> + CpuMpData->MicrocodePatchRegionSize = PcdGet64
> (PcdCpuMicrocodePatchRegionSize);
> InitializeSpinLock(&CpuMpData->MpLock);
> //
> // Save BSP's Control registers to APs
> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> index 19defda..84ae24f 100644
> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> @@ -233,6 +233,8 @@ struct _CPU_MP_DATA {
> UINT8 Vector;
> BOOLEAN PeriodicMode;
> BOOLEAN TimerInterruptState;
> + UINT64 MicrocodePatchAddress;
> + UINT64 MicrocodePatchRegionSize;
> };
>
> extern EFI_GUID mCpuInitMpLibHobGuid;
>
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel