Laszlo,
> -----Original Message-----
> From: Laszlo Ersek [mailto:ler...@redhat.com]
> Sent: Tuesday, October 24, 2017 6:16 PM
> To: Dong, Eric <eric.d...@intel.com>; edk2-devel@lists.01.org
> Cc: Ni, Ruiyu <ruiyu...@intel.com>; Paolo Bonzini <pbonz...@redhat.com>
> Subject: Re: [edk2] [Patch 2/2] UefiCpuPkg/MpInitLib: Enhance waiting for
> AP initialization logic.
>
> CC Paolo
>
> On 10/23/17 09:22, Eric Dong wrote:
> > Current logic always waiting for a specific value to collect all APs
> > count. This logic may caused some platforms cost too much time to wait
> > for time out.
> > This patch add new logic to collect APs count. It adds new variable
> > NumApsExecuting to detect whether all APs have finished initialization.
> > Each AP let NumApsExecuting++ when begin to initialize itself and let
> > NumApsExecuting-- when it finish the initialization. BSP base on
> > whether NumApsExecuting == 0 to finished the collect AP process.
> >
> > Cc: Ruiyu Ni <ruiyu...@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Eric Dong <eric.d...@intel.com>
> > ---
> > UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 1 +
> > UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm | 6 ++++++
> > UefiCpuPkg/Library/MpInitLib/MpLib.c | 20 ++++++++++++++------
> > UefiCpuPkg/Library/MpInitLib/MpLib.h | 1 +
> > UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 3 ++-
> > UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 6 ++++++
> > 6 files changed, 30 insertions(+), 7 deletions(-)
>
> I was out of office yesterday, and did not get a chance to comment on this
> patch.
>
> In a virtualization guest, I see the following problem with the patch:
>
> VCPUs (virtual CPUs) may not be scheduled by the hypervisor similarly to how
> physical CPUs behave on a physical board. It is possible that a VCPU starts up
> and even finishes its initialization routine before another VCPU starts
> running
> at all.
>
> Therefore the locked NumApsExecuting counter may hit zero, even multiple
> times, before all APs have finished initializing.
>
> In OVMF, we query QEMU about the exact number of virtual processors, in
> PlatformPei. So OVMF configures the logical processor count in advance that
> MpInitLib has to wait for. Correspondingly, we also set the timeout to
> "infinity".
>
> Please see the MaxCpuCountInitialization() function in following commit:
>
> https://github.com/tianocore/edk2/commit/45a70db3c3a59
>
> In the past, we used to have AP initialization problems in OVMF due to the
> VCPU scheduling artifacts I mention above. After commit 45a70db3c3a59,
> things have been stable; it would be nice to keep that working.
>
> Please note that simply testing this patch on my end is not sufficient.
> The AP init problems we used to face were sporadic and also specific to the
> virtualization host systems (i.e., dependent on the physical hardware and the
> host kernel).
>
> Furthermore:
[[Eric]] Will comments later if needed, need some investigation first.
>
> > diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
> > b/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
> > index 976af1f..bdfe0d3 100644
> > --- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
> > +++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
> > @@ -40,4 +40,5 @@ EnableExecuteDisableLocation equ LockLocation
> + 30h
> > Cr3Location equ LockLocation + 34h
> > InitFlagLocation equ LockLocation + 38h
> > CpuInfoLocation equ LockLocation + 3Ch
> > +NumApsExecutingLocation equ LockLocation + 40h
> >
> > diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
> > b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
> > index 1b9c6a6..2b6c27d 100644
> > --- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
> > +++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
> > @@ -86,6 +86,12 @@ Flat32Start: ;
> > protected mode
> entry point
> >
> > mov esi, ebx
> >
> > + ; Increment the number of APs executing here as early as possible
> > + ; This is decremented in C code when AP is finished executing
> > + mov edi, esi
> > + add edi, NumApsExecutingLocation
> > + lock inc dword [edi]
> > +
> > mov edi, esi
> > add edi, EnableExecuteDisableLocation
> > cmp byte [edi], 0
> > diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > index db923c9..48f930b 100644
> > --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > @@ -662,6 +662,7 @@ ApWakeupFunction (
> > // AP finished executing C code
> > //
> > InterlockedIncrement ((UINT32 *) &CpuMpData->FinishedCount);
> > + InterlockedDecrement ((UINT32 *)
> > + &CpuMpData->MpCpuExchangeInfo->NumApsExecuting);
> >
> > //
> > // Place AP is specified loop mode @@ -765,6 +766,7 @@
> > FillExchangeInfoData (
> >
> > ExchangeInfo->CFunction = (UINTN) ApWakeupFunction;
> > ExchangeInfo->ApIndex = 0;
> > + ExchangeInfo->NumApsExecuting = 0;
> > ExchangeInfo->InitFlag = (UINTN) CpuMpData->InitFlag;
> > ExchangeInfo->CpuInfo = (CPU_INFO_IN_HOB *) (UINTN)
> CpuMpData->CpuInfoInHob;
> > ExchangeInfo->CpuMpData = CpuMpData;
> > @@ -934,13 +936,19 @@ WakeUpAP (
> > }
> > if (CpuMpData->InitFlag == ApInitConfig) {
> > //
> > - // Wait for all potential APs waken up in one specified period
> > + // Wait for one potential AP waken up in one specified period
> > //
> > - TimedWaitForApFinish (
> > - CpuMpData,
> > - PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1,
> > - PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)
> > - );
> > + if (CpuMpData->CpuCount == 0) {
> > + TimedWaitForApFinish (
> > + CpuMpData,
> > + PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1,
> > + PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)
> > + );
> > + }
>
> I don't understand this change. The new comment says,
>
> Wait for *one* potential AP waken up in one specified period
>
> However, the second parameter of TimedWaitForApFinish(), namely
> "FinishedApLimit", gets the same value as before:
>
> PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1
>
> It means that all of the (possible) APs are waited-for, just the same as
> before.
[[Eric]] This patch changes the collect AP count logic, original solution
always waits for a specific time to let all APs start up. If the input CPU
number (PcdGet32(PcdCpuMaxLogicalProcessorNumber) - 1) have been found or after
a specific time(PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)). BSP will not
wait anymore and use CpuMpData->CpuCount as the found AP count.
New logic also wait for a specific time, but this time is smaller than the
original one. It just wait for the first AP(any AP) begin to do the
initialization( do CpuMpData->MpCpuExchangeInfo->NumApsExecuting++ means it
begin to do the initialization). When Ap finishes initialization, it will do
CpuMpData->MpCpuExchangeInfo->NumApsExecuting--. So after BSP waits for a
specific time at first, it just needs to check whether
CpuMpData->MpCpuExchangeInfo->NumApsExecuting == 0 to know whether all Aps have
finished initialization. Here we still use the original PCD
(PcdCpuApInitTimeOutInMicroSeconds) for the new time value.
When one AP do the initialization, it will also do CpuMpData->CpuCount++. So
here I check whether CpuMpData->CpuCount != 0 to know whether APs already begin
to do the initialization. If yes, I not need to do the time out waiting
anymore, just check the CpuMpData->MpCpuExchangeInfo->NumApsExecuting to know
whether all Aps have finished initialization.
>
> In other words, I think the patch does not correctly implement what the
> commit message says -- and for QEMU / OVMF, that's actually a good thing
> at the moment, because a correct implementation of the description would
> likely break on QEMU.
>
> Thanks
> Laszlo
>
> > +
> > + while (CpuMpData->MpCpuExchangeInfo->NumApsExecuting != 0) {
> > + CpuPause();
> > + }
> > } else {
> > //
> > // Wait all APs waken up if this is not the 1st broadcast of
> > SIPI diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > index e41d2db..d13d5c0 100644
> > --- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > @@ -176,6 +176,7 @@ typedef struct {
> > UINTN Cr3;
> > UINTN InitFlag;
> > CPU_INFO_IN_HOB *CpuInfo;
> > + UINTN NumApsExecuting;
> > CPU_MP_DATA *CpuMpData;
> > UINTN InitializeFloatingPointUnitsAddress;
> > } MP_CPU_EXCHANGE_INFO;
> > diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
> > b/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
> > index 114f4e0..d255ca5 100644
> > --- a/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
> > +++ b/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
> > @@ -40,5 +40,6 @@ EnableExecuteDisableLocation equ LockLocation
> + 5Ch
> > Cr3Location equ LockLocation + 64h
> > InitFlagLocation equ LockLocation + 6Ch
> > CpuInfoLocation equ LockLocation + 74h
> > -InitializeFloatingPointUnitsAddress equ LockLocation + 84h
> > +NumApsExecutingLocation equ LockLocation + 7Ch
> > +InitializeFloatingPointUnitsAddress equ LockLocation + 8Ch
> >
> > diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
> > b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
> > index 4ada649..21d2786 100644
> > --- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
> > +++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
> > @@ -124,6 +124,12 @@ LongModeStart:
> > cmp qword [edi], 1 ; ApInitConfig
> > jnz GetApicId
> >
> > + ; Increment the number of APs executing here as early as possible
> > + ; This is decremented in C code when AP is finished executing
> > + mov edi, esi
> > + add edi, NumApsExecutingLocation
> > + lock inc dword [edi]
> > +
> > ; AP init
> > mov edi, esi
> > add edi, LockLocation
> >
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
