Enable SATA LED function on MinnowBoard3 Next pre-production board. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: zwei4 <[email protected]> --- .../Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h b/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h index 49340b10f..f51274f19 100644 --- a/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h +++ b/Platform/BroxtonPlatformPkg/Board/MinnowBoard3Next/BoardInitPostMem/BoardGpios.h @@ -89,7 +89,7 @@ BXT_GPIO_PAD_INIT mMinnow3Next_GpioInitData_N[] = BXT_GPIO_PAD_CONF(L"GPIO_23", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00B8, NORTH), // BOOT_SEL1# BXT_GPIO_PAD_CONF(L"GPIO_24", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00C0, NORTH), // BOOT_SEL0# BXT_GPIO_PAD_CONF(L"GPIO_25", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00C8, NORTH), // TEST# - BXT_GPIO_PAD_CONF(L"GPIO_26", M0 , GPO , NA , HI , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00D0, NORTH), // SATA_LED# + BXT_GPIO_PAD_CONF(L"GPIO_26", M5 , NA , NA , NA , NA , Wake_Disabled, P_20K_L, NA , NA, NA , NA, GPIO_PADBAR+0x00D0, NORTH), // SATA_LEDN BXT_GPIO_PAD_CONF(L"GPIO_27", M0 , GPI , NA , NA , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00D8, NORTH), // NC BXT_GPIO_PAD_CONF(L"GPIO_28", M0 , GPO , NA , HI , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00E0, NORTH), // USB2_EN BXT_GPIO_PAD_CONF(L"GPIO_29", M0 , GPO , NA , HI , NA , Wake_Disabled, P_NONE , NA , NA, NA ,DisPuPd, GPIO_PADBAR+0x00E8, NORTH), // USB_DRIVE_BUS_1V8 -- 2.14.1.windows.1 _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
