Sorry, I did not follow up the thread for DxeRuntimeDebugLibSerialPort. For this thread, do you think it is feasible below for the case?
Use PeiDxeDebugLibReportStatusCode -> RuntimeDxeReportStatusCodeLib -> ReportStatusCodeRouterRuntimeDxe ReportStatusCodeRouterRuntimeDxe will produce gEfiRscHandlerProtocolGuid protocol. Like StatusCodeHandlerRuntimeDxe, consumer of gEfiRscHandlerProtocolGuid protocol can register handler to show debug message and etc. Thanks, Star -----Original Message----- From: Ard Biesheuvel [mailto:[email protected]] Sent: Friday, March 2, 2018 2:12 AM To: [email protected] Cc: [email protected]; [email protected]; [email protected]; Zeng, Star <[email protected]>; Dong, Eric <[email protected]>; Kinney, Michael D <[email protected]>; Gao, Liming <[email protected]>; Ard Biesheuvel <[email protected]> Subject: [PATCH 0/4] implement runtime debug output protocl As discussed on list, MMIO based UARTs cannot be used at runtime without taking special precautions to register the MMIO region and switch to the virtual address when accessing it at runtime. So extend the recently introduced DxeRuntimeDebugLibSerialPort library by invoking the proposed RuntimeDebugOutput protocol at runtime if one is available, and providing an implementation of this protocol for PL011. Ard Biesheuvel (4): MdePkg: move DxeRuntimeDebugLibSerialPort to MdeModulePkg MdeModulePkg: introduce runtime debug output protocol MdeModulePkg/DxeRuntimeDebugLibSerialPort: invoke RuntimeDebugOutputProtocol ArmPlatformPkg: add PL011 UART runtime debug driver ArmPlatformPkg/Drivers/PL011RuntimeDebugOutputDxe/PL011RuntimeDebugOutputDxe.c | 144 ++++++++++++++++++ ArmPlatformPkg/Drivers/PL011RuntimeDebugOutputDxe/PL011RuntimeDebugOutputDxe.inf | 62 ++++++++ ArmVirtPkg/ArmVirt.dsc.inc | 2 +- MdeModulePkg/Include/Protocol/RuntimeDebugOutput.h | 58 ++++++++ {MdePkg => MdeModulePkg}/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c | 155 +++++++++++++++++--- {MdePkg => MdeModulePkg}/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf | 5 + {MdePkg => MdeModulePkg}/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni | 0 MdeModulePkg/MdeModulePkg.dec | 4 + 8 files changed, 412 insertions(+), 18 deletions(-) create mode 100644 ArmPlatformPkg/Drivers/PL011RuntimeDebugOutputDxe/PL011RuntimeDebugOutputDxe.c create mode 100644 ArmPlatformPkg/Drivers/PL011RuntimeDebugOutputDxe/PL011RuntimeDebugOutputDxe.inf create mode 100644 MdeModulePkg/Include/Protocol/RuntimeDebugOutput.h rename {MdePkg => MdeModulePkg}/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c (70%) rename {MdePkg => MdeModulePkg}/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf (88%) rename {MdePkg => MdeModulePkg}/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.uni (100%) -- 2.11.0 _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
