Use ZeroMem() to initialize (or re-initialize) all fields in temporary PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but helpful for future extension: when we add new fields to PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can safely be zero, this code will not suffer from an additional change.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Heyi Guo <heyi....@linaro.org> Signed-off-by: Yi Li <phoenix.l...@huawei.com> Reviewed-by: Ni Ruiyu <ruiyu...@intel.com> Cc: Maurice Ma <maurice...@intel.com> Cc: Prince Agyeman <prince.agye...@intel.com> Cc: Benjamin You <benjamin....@intel.com> Cc: Ruiyu Ni <ruiyu...@intel.com> Cc: Laszlo Ersek <ler...@redhat.com> Cc: Ard Biesheuvel <ard.biesheu...@linaro.org> --- Notes: v6: - Move ZeroMem() into the loop just as Laszlo commented on OvmfPkg [Laszlo] - Minor changes in commit message CorebootPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/CorebootPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c b/CorebootPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c index 6d94ff72c956..18dcbafdf0c6 100644 --- a/CorebootPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c +++ b/CorebootPayloadPkg/Library/PciHostBridgeLib/PciHostBridgeSupport.c @@ -328,8 +328,13 @@ ScanForRootBridges ( for (PrimaryBus = 0; PrimaryBus <= PCI_MAX_BUS; PrimaryBus = SubBus + 1) { SubBus = PrimaryBus; Attributes = 0; + + ZeroMem (&Io, sizeof (Io)); + ZeroMem (&Mem, sizeof (Mem)); + ZeroMem (&MemAbove4G, sizeof (MemAbove4G)); + ZeroMem (&PMem, sizeof (PMem)); + ZeroMem (&PMemAbove4G, sizeof (PMemAbove4G)); Io.Base = Mem.Base = MemAbove4G.Base = PMem.Base = PMemAbove4G.Base = MAX_UINT64; - Io.Limit = Mem.Limit = MemAbove4G.Limit = PMem.Limit = PMemAbove4G.Limit = 0; // // Scan all the PCI devices on the primary bus of the PCI root bridge // -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel