On 16 February 2018 at 09:50, Meenakshi <[email protected]> wrote: > From: Vabhav <[email protected]> > > NXP SOC has mutiple PCIe RCs,Adding respective implementation of > EFI_CPU_IO2_PROTOCOL to provide Memory Space Read/Write functions > used by generic Host Bridge Driver including correct value for > the translation offset during MMIO accesses > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Vabhav <[email protected]> > Signed-off-by: Meenakshi Aggarwal <[email protected]>
This driver looks completely wrong to me: MMIO access is memory mapped, and given that you don't implement PCI to CPU translation of MMIO accesses, the memory read and write functions should not perform any translation at all, and just relay the accesses. On the other hand, the I/O accessors are not implemented at all, and these are the ones that require translation, given that the I/O port addresses in the CPU space need translation to MMIO addressess. Also, you don't seem to be using the PcdPciExp?BaseAddr PCDs anywhere, so you can drop them from the .dsc > --- > Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c | 529 > ++++++++++++++++++++++ > Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf | 48 ++ > 2 files changed, 577 insertions(+) > create mode 100644 Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c > create mode 100644 Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf > > diff --git a/Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c > b/Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c > new file mode 100644 > index 0000000..b5fb72c > --- /dev/null > +++ b/Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c > @@ -0,0 +1,529 @@ > +/** @file > + Produces the CPU I/O 2 Protocol. > + > + Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR> > + Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR> > + Copyright 2018 NXP > + > + This program and the accompanying materials > + are licensed and made available under the terms and conditions of the BSD > License > + which accompanies this distribution. The full text of the license may be > found at > + http://opensource.org/licenses/bsd-license.php > + > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > + > +**/ > + > +#include <Library/BaseLib.h> > +#include <Library/DebugLib.h> > +#include <Library/IoLib.h> > +#include <Library/PcdLib.h> > +#include <Library/UefiBootServicesTableLib.h> > +#include <Pcie.h> > +#include <Protocol/CpuIo2.h> > + > +#define MAX_IO_PORT_ADDRESS PCI_SEG2_PORTIO_MAX > + > +// > +// Handle for the CPU I/O 2 Protocol > +// > +STATIC EFI_HANDLE mHandle; > + > +// > +// Lookup table for increment values based on transfer widths > +// > +STATIC CONST UINT8 mInStride[] = { > + 1, // EfiCpuIoWidthUint8 > + 2, // EfiCpuIoWidthUint16 > + 4, // EfiCpuIoWidthUint32 > + 8, // EfiCpuIoWidthUint64 > + 0, // EfiCpuIoWidthFifoUint8 > + 0, // EfiCpuIoWidthFifoUint16 > + 0, // EfiCpuIoWidthFifoUint32 > + 0, // EfiCpuIoWidthFifoUint64 > + 1, // EfiCpuIoWidthFillUint8 > + 2, // EfiCpuIoWidthFillUint16 > + 4, // EfiCpuIoWidthFillUint32 > + 8 // EfiCpuIoWidthFillUint64 > +}; > + > +// > +// Lookup table for increment values based on transfer widths > +// > +STATIC CONST UINT8 mOutStride[] = { > + 1, // EfiCpuIoWidthUint8 > + 2, // EfiCpuIoWidthUint16 > + 4, // EfiCpuIoWidthUint32 > + 8, // EfiCpuIoWidthUint64 > + 1, // EfiCpuIoWidthFifoUint8 > + 2, // EfiCpuIoWidthFifoUint16 > + 4, // EfiCpuIoWidthFifoUint32 > + 8, // EfiCpuIoWidthFifoUint64 > + 0, // EfiCpuIoWidthFillUint8 > + 0, // EfiCpuIoWidthFillUint16 > + 0, // EfiCpuIoWidthFillUint32 > + 0 // EfiCpuIoWidthFillUint64 > +}; > + > +/** > + Check parameters to a CPU I/O 2 Protocol service request. > + > + The I/O operations are carried out exactly as requested. The caller is > responsible > + for satisfying any alignment and I/O width restrictions that a PI System > on a > + platform might require. For example on some platforms, width requests of > + EfiCpuIoWidthUint64 do not work. > + > + @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port > operation. > + @param[in] Width Signifies the width of the I/O or Memory > operation. > + @param[in] Address The base address of the I/O operation. > + @param[in] Count The number of I/O operations to perform. The > number of > + bytes moved is Width size * Count, starting at > Address. > + @param[in] Buffer For read operations, the destination buffer to > store the results. > + For write operations, the source buffer from > which to write data. > + > + @retval EFI_SUCCESS The parameters for this request pass the > checks. > + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. > + @retval EFI_INVALID_PARAMETER Buffer is NULL. > + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given > Width. > + @retval EFI_UNSUPPORTED The address range specified by Address, > Width, > + and Count is not valid for this PI system. > + > +**/ > +STATIC > +EFI_STATUS > +CpuIoCheckParameter ( > + IN BOOLEAN MmioOperation, > + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, > + IN UINT64 Address, > + IN UINTN Count, > + IN VOID *Buffer > + ) > +{ > + UINT64 MaxCount; > + UINT64 Limit; > + > + // > + // Check to see if Buffer is NULL > + // > + if (Buffer == NULL) { > + ASSERT (FALSE); > + return EFI_INVALID_PARAMETER; > + } > + > + // > + // Check to see if Width is in the valid range > + // > + if ((UINT32)Width >= EfiCpuIoWidthMaximum) { > + ASSERT (FALSE); > + return EFI_INVALID_PARAMETER; > + } > + > + // > + // For FIFO type, the target address won't increase during the access, > + // so treat Count as 1 > + // > + if (Width >= EfiCpuIoWidthFifoUint8 && Width <= EfiCpuIoWidthFifoUint64) { > + Count = 1; > + } > + > + // > + // Check to see if Width is in the valid range for I/O Port operations > + // > + Width = (EFI_CPU_IO_PROTOCOL_WIDTH)(Width & 0x03); > + if (!MmioOperation && (Width == EfiCpuIoWidthUint64)) { > + ASSERT (FALSE); > + return EFI_INVALID_PARAMETER; > + } > + > + // > + // Check to see if Address is aligned > + // > + if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) { > + ASSERT (FALSE); > + return EFI_UNSUPPORTED; > + } > + > + // > + // Check to see if any address associated with this transfer exceeds the > maximum > + // allowed address. The maximum address implied by the parameters passed > in is > + // Address + Size * Count. If the following condition is met, then the > transfer > + // is not supported. > + // > + // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : > MAX_IO_PORT_ADDRESS) + 1 > + // > + // Since MAX_ADDRESS can be the maximum integer value supported by the CPU > and Count > + // can also be the maximum integer value supported by the CPU, this range > + // check must be adjusted to avoid all oveflow conditions. > + // > + Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS); > + if (Count == 0) { > + if (Address > Limit) { > + ASSERT (FALSE); > + return EFI_UNSUPPORTED; > + } > + } else { > + MaxCount = RShiftU64 (Limit, Width); > + if (MaxCount < (Count - 1)) { > + ASSERT (FALSE); > + return EFI_UNSUPPORTED; > + } > + if (Address > LShiftU64 (MaxCount - Count + 1, Width)) { > + ASSERT (FALSE); > + return EFI_UNSUPPORTED; > + } > + } > + > + // > + // Check to see if Buffer is aligned > + // > + if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != > 0) { > + ASSERT (FALSE); > + return EFI_UNSUPPORTED; > + } > + > + return EFI_SUCCESS; > +} > + > +/** > + Reads memory-mapped registers. > + > + The I/O operations are carried out exactly as requested. The caller is > responsible > + for satisfying any alignment and I/O width restrictions that a PI System > on a > + platform might require. For example on some platforms, width requests of > + EfiCpuIoWidthUint64 do not work. > + > + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, > + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for > + each of the Count operations that is performed. > + > + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, > + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times on the same Address. > + > + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, > + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times from the first element of Buffer. > + > + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. > + @param[in] Width Signifies the width of the I/O or Memory operation. > + @param[in] Address The base address of the I/O operation. > + @param[in] Count The number of I/O operations to perform. The number of > + bytes moved is Width size * Count, starting at > Address. > + @param[out] Buffer For read operations, the destination buffer to store > the results. > + For write operations, the source buffer from which to > write data. > + > + @retval EFI_SUCCESS The data was read from or written to the PI > system. > + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. > + @retval EFI_INVALID_PARAMETER Buffer is NULL. > + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given > Width. > + @retval EFI_UNSUPPORTED The address range specified by Address, > Width, > + and Count is not valid for this PI system. > + > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +CpuMemoryServiceRead ( > + IN EFI_CPU_IO2_PROTOCOL *This, > + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, > + IN UINT64 Address, > + IN UINTN Count, > + OUT VOID *Buffer > + ) > +{ > + EFI_STATUS Status; > + UINT8 InStride; > + UINT8 OutStride; > + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; > + UINT8 *Uint8Buffer; > + > + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + > + if ((Address >= PCI_SEG0_MMIO32_MIN) && > + (Address <= PCI_SEG0_MMIO32_MAX)) { > + Address += PCI_SEG0_MMIO_MEMBASE; > + } else if ((Address >= PCI_SEG1_MMIO32_MIN) && > + (Address <= PCI_SEG1_MMIO32_MAX)) { > + Address += PCI_SEG1_MMIO_MEMBASE; > + } else if ((Address >= PCI_SEG2_MMIO32_MIN) && > + (Address <= PCI_SEG2_MMIO32_MAX)) { > + Address += PCI_SEG2_MMIO_MEMBASE; > + } else if ((Address >= PCI_SEG3_MMIO32_MIN) && > + (Address <= PCI_SEG3_MMIO32_MAX)) { > + Address += PCI_SEG3_MMIO_MEMBASE; > + } else { > + ASSERT (FALSE); > + return EFI_INVALID_PARAMETER; > + } > + > + // > + // Select loop based on the width of the transfer > + // > + InStride = mInStride[Width]; > + OutStride = mOutStride[Width]; > + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); > + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += > OutStride, Count--) { > + if (OperationWidth == EfiCpuIoWidthUint8) { > + *Uint8Buffer = MmioRead8 ((UINTN)Address); > + } else if (OperationWidth == EfiCpuIoWidthUint16) { > + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); > + } else if (OperationWidth == EfiCpuIoWidthUint32) { > + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); > + } else if (OperationWidth == EfiCpuIoWidthUint64) { > + *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); > + } > + } > + return EFI_SUCCESS; > +} > + > +/** > + Writes memory-mapped registers. > + > + The I/O operations are carried out exactly as requested. The caller is > responsible > + for satisfying any alignment and I/O width restrictions that a PI System > on a > + platform might require. For example on some platforms, width requests of > + EfiCpuIoWidthUint64 do not work. > + > + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, > + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for > + each of the Count operations that is performed. > + > + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, > + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times on the same Address. > + > + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, > + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times from the first element of Buffer. > + > + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. > + @param[in] Width Signifies the width of the I/O or Memory operation. > + @param[in] Address The base address of the I/O operation. > + @param[in] Count The number of I/O operations to perform. The number of > + bytes moved is Width size * Count, starting at > Address. > + @param[in] Buffer For read operations, the destination buffer to store > the results. > + For write operations, the source buffer from which to > write data. > + > + @retval EFI_SUCCESS The data was read from or written to the PI > system. > + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. > + @retval EFI_INVALID_PARAMETER Buffer is NULL. > + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given > Width. > + @retval EFI_UNSUPPORTED The address range specified by Address, > Width, > + and Count is not valid for this PI system. > + > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +CpuMemoryServiceWrite ( > + IN EFI_CPU_IO2_PROTOCOL *This, > + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, > + IN UINT64 Address, > + IN UINTN Count, > + IN VOID *Buffer > + ) > +{ > + EFI_STATUS Status; > + UINT8 InStride; > + UINT8 OutStride; > + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; > + UINT8 *Uint8Buffer; > + > + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + > + if ((Address >= PCI_SEG0_MMIO32_MIN) && > + (Address <= PCI_SEG0_MMIO32_MAX)) { > + Address += PCI_SEG0_MMIO_MEMBASE; > + } else if ((Address >= PCI_SEG1_MMIO32_MIN) && > + (Address <= PCI_SEG1_MMIO32_MAX)) { > + Address += PCI_SEG1_MMIO_MEMBASE; > + } else if ((Address >= PCI_SEG2_MMIO32_MIN) && > + (Address <= PCI_SEG2_MMIO32_MAX)) { > + Address += PCI_SEG2_MMIO_MEMBASE; > + } else if ((Address >= PCI_SEG3_MMIO32_MIN) && > + (Address <= PCI_SEG3_MMIO32_MAX)) { > + Address += PCI_SEG3_MMIO_MEMBASE; > + } else { > + ASSERT (FALSE); > + return EFI_INVALID_PARAMETER; > + } > + > + // > + // Select loop based on the width of the transfer > + // > + InStride = mInStride[Width]; > + OutStride = mOutStride[Width]; > + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); > + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += > OutStride, Count--) { > + if (OperationWidth == EfiCpuIoWidthUint8) { > + MmioWrite8 ((UINTN)Address, *Uint8Buffer); > + } else if (OperationWidth == EfiCpuIoWidthUint16) { > + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); > + } else if (OperationWidth == EfiCpuIoWidthUint32) { > + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); > + } else if (OperationWidth == EfiCpuIoWidthUint64) { > + MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); > + } > + } > + return EFI_SUCCESS; > +} > + > +/** > + Reads I/O registers. > + > + The I/O operations are carried out exactly as requested. The caller is > responsible > + for satisfying any alignment and I/O width restrictions that a PI System > on a > + platform might require. For example on some platforms, width requests of > + EfiCpuIoWidthUint64 do not work. > + > + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, > + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for > + each of the Count operations that is performed. > + > + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, > + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times on the same Address. > + > + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, > + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times from the first element of Buffer. > + > + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. > + @param[in] Width Signifies the width of the I/O or Memory operation. > + @param[in] Address The base address of the I/O operation. > + @param[in] Count The number of I/O operations to perform. The number of > + bytes moved is Width size * Count, starting at > Address. > + @param[out] Buffer For read operations, the destination buffer to store > the results. > + For write operations, the source buffer from which to > write data. > + > + @retval EFI_SUCCESS The data was read from or written to the PI > system. > + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. > + @retval EFI_INVALID_PARAMETER Buffer is NULL. > + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given > Width. > + @retval EFI_UNSUPPORTED The address range specified by Address, > Width, > + and Count is not valid for this PI system. > + > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +CpuIoServiceRead ( > + IN EFI_CPU_IO2_PROTOCOL *This, > + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, > + IN UINT64 Address, > + IN UINTN Count, > + OUT VOID *Buffer > + ) > +{ > + return EFI_SUCCESS; > +} > + > +/** > + Write I/O registers. > + > + The I/O operations are carried out exactly as requested. The caller is > responsible > + for satisfying any alignment and I/O width restrictions that a PI System > on a > + platform might require. For example on some platforms, width requests of > + EfiCpuIoWidthUint64 do not work. > + > + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, > + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for > + each of the Count operations that is performed. > + > + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, > + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times on the same Address. > + > + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, > + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is > + incremented for each of the Count operations that is performed. The read or > + write operation is performed Count times from the first element of Buffer. > + > + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. > + @param[in] Width Signifies the width of the I/O or Memory operation. > + @param[in] Address The base address of the I/O operation. > + @param[in] Count The number of I/O operations to perform. The number of > + bytes moved is Width size * Count, starting at > Address. > + @param[in] Buffer For read operations, the destination buffer to store > the results. > + For write operations, the source buffer from which to > write data. > + > + @retval EFI_SUCCESS The data was read from or written to the PI > system. > + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. > + @retval EFI_INVALID_PARAMETER Buffer is NULL. > + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given > Width. > + @retval EFI_UNSUPPORTED The address range specified by Address, > Width, > + and Count is not valid for this PI system. > + > +**/ > +STATIC > +EFI_STATUS > +EFIAPI > +CpuIoServiceWrite ( > + IN EFI_CPU_IO2_PROTOCOL *This, > + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, > + IN UINT64 Address, > + IN UINTN Count, > + IN VOID *Buffer > + ) > +{ > + return EFI_SUCCESS; > +} > + > +// > +// CPU I/O 2 Protocol instance > +// > +STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = { > + { > + CpuMemoryServiceRead, > + CpuMemoryServiceWrite > + }, > + { > + CpuIoServiceRead, > + CpuIoServiceWrite > + } > +}; > + > + > +/** > + The user Entry Point for module CpuIo2Dxe. The user code starts with this > function. > + > + @param[in] ImageHandle The firmware allocated handle for the EFI image. > + @param[in] SystemTable A pointer to the EFI System Table. > + > + @retval EFI_SUCCESS The entry point is executed successfully. > + @retval other Some error occurs when executing this entry > point. > + > +**/ > +EFI_STATUS > +EFIAPI > +PciCpuIo2Initialize ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + > + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid); > + Status = gBS->InstallMultipleProtocolInterfaces ( > + &mHandle, > + &gEfiCpuIo2ProtocolGuid, &mCpuIo2, > + NULL > + ); > + ASSERT_EFI_ERROR (Status); > + > + return Status; > +} > diff --git a/Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf > b/Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf > new file mode 100644 > index 0000000..25a1db1 > --- /dev/null > +++ b/Silicon/NXP/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf > @@ -0,0 +1,48 @@ > +## @file > +# Produces the CPU I/O 2 Protocol by using the services of the I/O Library. > +# > +# Copyright 2018 NXP > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD > License > +# which accompanies this distribution. The full text of the license may be > found at > +# http://opensource.org/licenses/bsd-license.php > +# > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > +# > +## > + > +[Defines] > + INF_VERSION = 0x0001001A > + BASE_NAME = PciCpuIo2Dxe > + FILE_GUID = 7bff18d7-9aae-434b-9c06-f10a7e157eac > + MODULE_TYPE = DXE_DRIVER > + VERSION_STRING = 1.0 > + ENTRY_POINT = PciCpuIo2Initialize > + > +[Sources] > + PciCpuIo2Dxe.c > + > +[Packages] > + MdePkg/MdePkg.dec > + Silicon/NXP/NxpQoriqLs.dec > + > +[LibraryClasses] > + BaseLib > + DebugLib > + IoLib > + UefiBootServicesTableLib > + UefiDriverEntryPoint > + > +[Pcd] > + gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseAddr > + gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseAddr > + gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseAddr > + gNxpQoriqLsTokenSpaceGuid.PcdPciExp4BaseAddr > + > +[Protocols] > + gEfiCpuIo2ProtocolGuid ## PRODUCES > + > +[Depex] > + TRUE > -- > 1.9.1 > _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
