On Thu, May 24, 2018 at 5:57 PM, Ard Biesheuvel <[email protected]> wrote: > On 23 May 2018 at 07:45, Thomas Abraham <[email protected]> wrote: >> Changes since v5: >> - removed 'Change-Id' from all the patches in this series. >> >> Changes since v4: >> - addressed all the review comments from Ard and Alexei >> >> Changes since v3: >> - adds support for SMSC9118 ethernet controller >> - adds support for PCIe and SATA controller to enable SATA disk access >> >> Changes since v2: >> - addressed all the comments from Ard. >> - PrePeiCore is used instead of PrePi. >> >> Changes since v1: >> - minor update to commit messages >> >> Arm CoreLink System Guidance for Infrastructure is a collection of >> resources to provide a representative view of typical compute subsystems >> that can be designed and implemented using specific generations of Arm IP. >> These compute subsystems address the expected requirements of a specific >> segment of the infrastructure market which includes servers, storage and >> networking. >> >> This patch series adds initial platform port support for Arm'S SGI-575 >> platform. This platform has 8x Cortex-A75 CPUs, supports DynamIQ >> with L3 cache options, supports 2x DDR4-3200 (DMC-620) memory controller >> and is SBSAv3 compliant. This series includes support for GIC, Serial, >> smsc91x and virtio block device. >> >> Daniil Egranov (4): >> Platform/ARM/Sgi: add initial platform dxe driver implementation >> Platform/ARM/Sgi: add support for virtio block device >> Platform/ARM/Sgi: add the initial set of acpi tables >> Platform/ARM/Sgi: add support for smsc91x ethernet controller >> >> Thomas Abraham (3): >> Platform/ARM/Sgi: Add Platform library implementation >> Platform/ARM/Sgi: implement PciHostBridgeLib support >> Platform/ARM/Sgi: Add Ssdt, Iort and Mcfg tables >> >> Vishwanatha HG (2): >> Platform/ARM/Sgi: add NOR flash platform library implementation >> Platform/ARM/Sgi: add initial support for ARM SGI platform >> > > For the series > > Reviewed-by: Ard Biesheuvel <[email protected]> > > Pushed as e174fc77d3bb..eecb5e2f58a9 > > Thanks,
Thank you Ard. Regards, Thomas. > _______________________________________________ > edk2-devel mailing list > [email protected] > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
