It's a typo. V2 patch will correct this.

Thanks/Ray

> -----Original Message-----
> From: edk2-devel <[email protected]> On Behalf Of
> [email protected]
> Sent: Wednesday, August 8, 2018 2:27 AM
> To: Ni, Ruiyu <[email protected]>
> Cc: Carsey, Jaben <[email protected]>; [email protected]
> Subject: Re: [edk2] [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case
> sensitive compare
> 
> Ray,
> 
> Table 8 in version 2.2 of the Shell Spec says "lasterror" (lower-case L).  Why
> compare to "Lasterror"?
> 
> Regards,
> Jim
> 
> -----Original Message-----
> From: Carsey, Jaben [mailto:[email protected]]
> Sent: Tuesday, August 7, 2018 12:57 PM
> To: Ni, Ruiyu; [email protected]
> Cc: Dailey, Jim
> Subject: RE: [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case sensitive
> compare
> 
> Reviewed-by: Jaben Carsey <[email protected]>
> 
> > -----Original Message-----
> > From: Ni, Ruiyu
> > Sent: Tuesday, August 07, 2018 2:14 AM
> > To: [email protected]
> > Cc: Carsey, Jaben <[email protected]>; Jim Dailey
> > <[email protected]>
> > Subject: [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case
> > sensitive compare
> > Importance: High
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
> >
> > Per Shell spec, the environment variable has a case-sensitive name.
> > But today's implementation of EfiShellSetEnv() compares the
> > environment variable name case insensitively, which causes variable
> > like "CWD" cannot be set due to "cwd" is pre-defined variable.
> >
> > The patch fixes this issue.
> >
> > The EfiShellGetEnv() doesn't have such issue because it will call into
> > ShellFindEnvVarInList() which uses StrCmp().
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Ruiyu Ni <[email protected]>
> > Cc: Jaben Carsey <[email protected]>
> > Cc: Jim Dailey <[email protected]>
> > ---
> >  ShellPkg/Application/Shell/ShellProtocol.c | 39
> > +++++++-----------------------
> >  1 file changed, 9 insertions(+), 30 deletions(-)
> >
> > diff --git a/ShellPkg/Application/Shell/ShellProtocol.c
> > b/ShellPkg/Application/Shell/ShellProtocol.c
> > index f2ca2029e3..767cbc99a0 100644
> > --- a/ShellPkg/Application/Shell/ShellProtocol.c
> > +++ b/ShellPkg/Application/Shell/ShellProtocol.c
> > @@ -2924,36 +2924,15 @@ EfiShellSetEnv(
> >    //
> >    // Make sure we dont 'set' a predefined read only variable
> >    //
> > -  if (gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        L"cwd") == 0
> > -    ||gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        L"Lasterror") == 0
> > -    ||gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        L"profiles") == 0
> > -    ||gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        L"uefishellsupport") == 0
> > -    ||gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        L"uefishellversion") == 0
> > -    ||gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        L"uefiversion") == 0
> > -    ||(!ShellInfoObject.ShellInitSettings.BitUnion.Bits.NoNest &&
> > -      gUnicodeCollation->StriColl(
> > -        gUnicodeCollation,
> > -        (CHAR16*)Name,
> > -        (CHAR16*)mNoNestingEnvVarName) == 0)
> > -       ){
> > +  if ((StrCmp (Name, L"cwd") == 0) ||
> > +      (StrCmp (Name, L"Lasterror") == 0) ||
> > +      (StrCmp (Name, L"profiles") == 0) ||
> > +      (StrCmp (Name, L"uefishellsupport") == 0) ||
> > +      (StrCmp (Name, L"uefishellversion") == 0) ||
> > +      (StrCmp (Name, L"uefiversion") == 0) ||
> > +      (!ShellInfoObject.ShellInitSettings.BitUnion.Bits.NoNest &&
> > +       StrCmp (Name, mNoNestingEnvVarName) == 0)
> > +     ) {
> >      return (EFI_INVALID_PARAMETER);
> >    }
> >    return (InternalEfiShellSetEnv(Name, Value, Volatile));
> > --
> > 2.16.1.windows.1
> 
> _______________________________________________
> edk2-devel mailing list
> [email protected]
> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to