Hello,
This is my first time posting to a mailing list. I am building a custom
platform that fails when handing off control from PEIM to DXE.
Here's the error:
```
ASSERT_EFI_ERROR (Status = Not Found)
ASSERT
c:\users\hrimih\documents\work\scalable\bios\MdeModulePkg\Core\DxeIplPeim\DxeLoad.c(480):
!EFI_ERROR (Status)
```
In the platform only the DXE phase is compressed, using LZMA. I suspect that
it's not being decompressed and the module cannot find the DXE entry point.
This is the relevant .FDF part.
```
[FV.FVMAIN]
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = CDBB7B35-6833-4ed6-9AB2-57D2ACDDF6F0
....
INF modules
....
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = 27A72E80-3118-4c0c-8673-AA5B4EFA9613
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED =
TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
```
Then in the .DSC I have:
```
MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
<LibraryClasses>
NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
}
```
And for the DXE Main:
```
MdeModulePkg/Core/Dxe/DxeMain.inf {
<LibraryClasses>
DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
NULL|
MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
<PcdsFixedAtBuild>
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|0
}
```
I expect that this PEIM module will decompress the DXE partition and find the
entry point:
```
DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
```
Any advice on how I can debug/fix this?
Regards,
Hristo Mihaylov
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel
