Briefly looking at Panda board manual, I see “SMSC LAN9514” chipset.
From: Shivamurthy Shastri [mailto:[email protected]]
Sent: Thursday, February 07, 2013 8:52 AM
To: Amit Mahadik; [email protected]
Subject: Re: [edk2] Pandaboard Ethernet
Hi Amit,
On Thu, Feb 7, 2013 at 12:50 PM, Amit Mahadik
<[email protected]<mailto:[email protected]>> wrote:
Hello,
I would like to know about the Ethernet driver for PandaBoard.According
to UEFI Network Stack Getting Started Guide
http://sourceforge.net/projects/network-io/files/Documents/EFINetworkStackGettingStarted.pdf/download
it staes that you have to enable the UNDI driver for the LAN card but I am
unable to find the ethernet/undi driver in the PandaBoardPkg. Any suggestions
would be helpful.
It is not necessary that you have to use UNDI driver. SNP driver also works
fine.
Please let me know which ethernet controller chip panda board uses.
Regards,
Amit.
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
Texas Instruments France SA, 821 Avenue Jack Kilby, 06270 Villeneuve Loubet.
036 420 040 R.C.S Antibes. Capital de EUR 12.654.784
_______________________________________________
edk2-devel mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/edk2-devel
--
Thanks and Regards,
Shiva.
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-devel
