Hi, Sergey
The Assert() in XhcReadOpReg() makes sense as it would never be false if the
XHCI controller follows XHCI spec.
For your 2nd concern, yes, we didn't care the return data for such cases.
Thanks
Feng
From: Sergey Isakov [mailto:isakov...@bk.ru]
Sent: Tuesday, September 17, 2013 16:13
To: edk2-devel@lists.sourceforge.net
Subject: Re: [edk2] XHCI Issues
One more issue here. Look into XhcReadRuntimeReg ()
------
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "XhcReadRuntimeReg: Pci Io Read error - %r at %d\n",
Status, Offset));
Data = 0xFFFFFFFF;
}
return Data;
}
------
But usage of the procedure do not propose wrong return. For example
---------
Data = XhcReadRuntimeReg (Xhc, Offset);
Data |= Bit;
XhcWriteRuntimeReg (Xhc, Offset, Data);
-----------
Yours,
Sergey
On 17.09.2013, at 11:20, Sergey Isakov wrote:
Hi Feng,
I am also thinking about different ASSERTs in the driver.
If debug then ASSERT cause a hang/stop/break.
If release then ASSERT do nothing causes next operator to crash (null pointer
etc).
For example
------------------
UINT32
XhcReadOpReg (
IN USB_XHCI_INSTANCE *Xhc,
IN UINT32 Offset
)
{
UINT32 Data;
EFI_STATUS Status;
ASSERT (Xhc->CapLength != 0);
------------------
Is it true for all controllers? May be we can make
-----------------
if (!Xhc->CapLength) {
return 0xFFFFFFFF;
}
----------------- ?
The same for door bell and others.
I am not sure there is a trouble but I don't like ASSERT.
Sergey.
On 17.09.2013, at 7:23, Sergey Isakov wrote:
Hi Feng,
Yes, it is good. I was also thinking that 0 may be right value. (not in my
case).
Sergey.
On 17.09.2013, at 7:00, "Tian, Feng"
<feng.t...@intel.com<mailto:feng.t...@intel.com>> wrote:
Hi, Sergey
Please help review the patch.
The patch has a little different with yours as value 0 may be the correct
return value for some XHCI cards which supports USB Legacy Support Capability.
Thanks
Feng
From: Tian, Feng
Sent: Monday, September 16, 2013 15:57
To: edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
Cc: Tian, Feng
Subject: RE: [edk2] XHCI Issues
Yes, you are right. Usb Legacy Support Capability is optional, we should ignore
it if the XHCI controller doesn't support this feature.
I will follow up it as soon as possible.
From: Sergey Isakov [mailto:isakov...@bk.ru]
Sent: Monday, September 16, 2013 15:33
To: edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
Subject: Re: [edk2] XHCI Issues
Dear sirs,
I found new issue with XhciDxe driver.
I have USB3 PCIe adapter with chip VIA VL800-Q8. It works but the code
--------
Xhc->UsbLegSupOffset = XhcGetLegSupCapAddr (Xhc);
--------
returns Zero.
And then in procedure
------------------
VOID
XhcSetBiosOwnership (
IN USB_XHCI_INSTANCE *Xhc
)
{
UINT32 Buffer;
DEBUG ((EFI_D_INFO, "XhcSetBiosOwnership: called to set BIOS ownership\n"));
Buffer = XhcReadExtCapReg (Xhc, Xhc->UsbLegSupOffset);
Buffer = ((Buffer & (~USBLEGSP_OS_SEMAPHORE)) | USBLEGSP_BIOS_SEMAPHORE);
XhcWriteExtCapReg (Xhc, Xhc->UsbLegSupOffset, Buffer);
}
------------------
I have a hang.
It will be good to add check for zero
------------------
VOID
XhcSetBiosOwnership (
IN USB_XHCI_INSTANCE *Xhc
)
{
UINT32 Buffer;
if (!Xhc->UsbLegSupOffset) {
DEBUG ((EFI_D_INFO, "XhcSetBiosOwnership: not set\n"));
return;
}
------------------
The same for ClearBiosOwnership
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sergey Isakov <isakov...@bk.ru<mailto:isakov...@bk.ru>>
On 12.08.2013, at 12:55, Li, Elvin wrote:
Eugene,
The XHCI DMA update has been checked in to edk2 14546. If you
find any problems, please contact me.
Thanks
Elvin
From: Cohen, Eugene [mailto:eug...@hp.com]
Sent: Thursday, July 25, 2013 4:29 AM
To: edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
Subject: [edk2] XHCI DMA Buffer Issues
Dear XhciDxe Maintainer,
I'm currently reviewing the XhciDxe driver and I'm trying to figure out how DMA
buffers are allocated. I see a number of pool and page allocations but I do
not see any called to PCI_IO Map()/Unmap() or to AllocateBuffer()/FreeBuffer().
This appears to be violating the rules for PCI DMA buffers since they are not
being mapped (and if common buffers are desired then they are also not being
allocated with AllocateBuffer as required).
Can someone more familiar with XHCI help me determine which buffers need to be
mapped and how (BusMasterRead, BusMasterWrite, CommonBuffer)?
It would be useful if we had a test environment that could catch driver DMA
buffer mapping issues earlier. I think one way to do this would be set up the
MMU in a non-identity mode so that anyone trying to use a processor virtual
address for DMA would see a failure.
Thanks,
Eugene
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/edk2-devel
<XhciReg.c.patch>------------------------------------------------------------------------------
LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99!
1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint
2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes
Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13.
http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/edk2-devel
------------------------------------------------------------------------------
LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99!
1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint
2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes
Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13.
http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/edk2-devel
------------------------------------------------------------------------------
LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99!
1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint
2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes
Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13.
http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net<mailto:edk2-devel@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/edk2-devel
------------------------------------------------------------------------------
LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99!
1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint
2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes
Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13.
http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
