Reviewed-by: Auber Lin <[email protected]>

-----Original Message-----
From: Ni, Ruiyu 
Sent: Tuesday, April 28, 2015 4:26 PM
To: [email protected]
Cc: Ni, Ruiyu; Lin, Jie
Subject: [Patch 2/2] MdeModulePkg: Remove EFI_ABORTED from I2C protocols per PI 
spec 1.4.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <[email protected]>
CC: Jie Lin <[email protected]>
---
 MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c  | 4 +---  
MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c | 4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c 
b/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c
index c9913c0..8d03135 100644
--- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c
+++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cBus.c
@@ -2,7 +2,7 @@
   This file implements I2C IO Protocol which enables the user to manipulate a 
single 
   I2C device independent of the host controller and I2C design.
 
-  Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+  Copyright (c) 2013 - 2015, Intel Corporation. All rights 
+ reserved.<BR>
   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD 
License
   which accompanies this distribution.  The full text of the license may be 
found at @@ -1108,8 +1108,6 @@ RegisterI2cDevice (
                                 queued when Event is not NULL.
   @retval EFI_SUCCESS           The transaction completed successfully when
                                 Event is NULL.
-  @retval EFI_ABORTED           The request did not complete because the driver
-                                binding Stop() routine was called.
   @retval EFI_BAD_BUFFER_SIZE   The RequestPacket->LengthInBytes value is too
                                 large.
   @retval EFI_DEVICE_ERROR      There was an I2C error (NACK) during the
diff --git a/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c 
b/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c
index 319507c..68dd931 100644
--- a/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c
+++ b/MdeModulePkg/Bus/I2c/I2cDxe/I2cHost.c
@@ -3,7 +3,7 @@
   do I/O transactions to all of the devices on the I2C bus.
 
   Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>
-  Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>
+  Copyright (c) 2013 - 2015, Intel Corporation. All rights 
+ reserved.<BR>
   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD 
License
   which accompanies this distribution.  The full text of the license may be 
found at @@ -896,8 +896,6 @@ I2cHostRequestEnable (
                               completion status
 
   @retval EFI_SUCCESS           The operation completed successfully.
-  @retval EFI_ABORTED           The request did not complete because the driver
-                                was shutdown.
   @retval EFI_BAD_BUFFER_SIZE   The WriteBytes or ReadBytes buffer size is too 
large.
   @retval EFI_DEVICE_ERROR      There was an I2C error (NACK) during the 
operation.
                                 This could indicate the slave device is not 
present.
--
1.9.5.msysgit.1


------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud 
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-devel

Reply via email to