These messages are helpful for comparing the assignments made by OVMF
against those made by SeaBIOS. To SeaBIOS a small debug patch like the
following can be applied:
> diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> index ac39d23..9e61c22 100644
> --- a/src/fw/pciinit.c
> +++ b/src/fw/pciinit.c
> @@ -308,8 +308,12 @@ static void pci_bios_init_device(struct pci_device *pci)
>
> /* map the interrupt */
> int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN);
> - if (pin != 0)
> - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci,
> pin));
> + if (pin != 0) {
> + int irqline = pci_slot_get_irq(pci, pin);
> +
> + pci_config_writeb(bdf, PCI_INTERRUPT_LINE, irqline);
> + dprintf(1, "assigned irq line %d\n", irqline);
> + }
>
> pci_init_device(pci_device_tbl, pci, NULL);
>
Cc: Gabriel Somlo <so...@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <ler...@redhat.com>
Acked-by: Gabriel Somlo <so...@cmu.edu>
---
Notes:
v2:
- use PciIo.GetLocation() too, in order to get an output more easily
comparable
with SeaBIOS's
- drop Gabriel's Regression-tested-by
OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c | 25 ++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c
b/OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c
index 1eb2a8b..fdae6b1 100644
--- a/OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c
+++ b/OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c
@@ -749,6 +749,7 @@ SetPciIntLine (
)
{
EFI_DEVICE_PATH_PROTOCOL *DevPathNode;
+ EFI_DEVICE_PATH_PROTOCOL *DevPath;
UINTN RootSlot;
UINTN Idx;
UINT8 IrqLine;
@@ -760,6 +761,7 @@ SetPciIntLine (
DevPathNode = DevicePathFromHandle (Handle);
ASSERT (DevPathNode != NULL);
+ DevPath = DevPathNode;
//
// Compute index into PciHostIrqs[] table by walking
@@ -832,6 +834,29 @@ SetPciIntLine (
Idx %= ARRAY_SIZE (PciHostIrqs);
IrqLine = PciHostIrqs[Idx];
+ DEBUG_CODE_BEGIN ();
+ {
+ CHAR16 *DevPathString;
+ STATIC CHAR16 Fallback[] = L"<failed to convert>";
+ UINTN Segment, Bus, Device, Function;
+
+ DevPathString = ConvertDevicePathToText (DevPath, FALSE, FALSE);
+ if (DevPathString == NULL) {
+ DevPathString = Fallback;
+ }
+ Status = PciIo->GetLocation (PciIo, &Segment, &Bus, &Device, &Function);
+ ASSERT_EFI_ERROR (Status);
+
+ DEBUG ((EFI_D_VERBOSE, "%a: [%02x:%02x.%x] %s -> 0x%02x\n", __FUNCTION__,
+ (UINT32)Bus, (UINT32)Device, (UINT32)Function, DevPathString,
+ IrqLine));
+
+ if (DevPathString != Fallback) {
+ FreePool (DevPathString);
+ }
+ }
+ DEBUG_CODE_END ();
+
//
// Set PCI Interrupt Line register for this device to PciHostIrqs[Idx]
//
--
1.8.3.1
------------------------------------------------------------------------------
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
