Cc: Ruiyu Ni <ruiyu...@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <ler...@redhat.com>
Regression-tested-by: Gabriel Somlo <so...@cmu.edu>
Reviewed-by: Ruiyu Ni <ruiyu...@intel.com>
---
Notes:
v3:
- rewrap the driver under PcAtChipsetPkg
PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h | 590 ++++++++++++--------
1 file changed, 372 insertions(+), 218 deletions(-)
diff --git a/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
b/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
index f9ef7d8..59f47e7 100644
--- a/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
+++ b/PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridge.h
@@ -1,16 +1,16 @@
/** @file
- The Header file of the Pci Host Bridge Driver
+ The Header file of the Pci Host Bridge Driver
Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials are
- licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be
found at
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
-
+
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
+**/
#ifndef _PCI_HOST_BRIDGE_H_
#define _PCI_HOST_BRIDGE_H_
@@ -72,68 +72,114 @@ typedef struct {
//
/**
- These are the notifications from the PCI bus driver that it is about to
enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to
perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready
to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures
and internal data
- structures. The PCI enumerator
should issue this notification
- before starting a fresh enumeration
process. Enumeration cannot
- be restarted after sending any other
notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to
begin. No specific action is
- required here. This notification can
be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus
programming phase is complete. No
- specific action is required here.
This notification can be used to
- perform any chipset-specific
programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is
about to begin. No specific
- action is required here. This
notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously
submitted requests for all the PCI
- root bridges. These resource
settings are returned on the next call to
- GetProposedResources(). Before
calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource,
the PCI bus enumerator is responsible
- for gathering I/O and memory
requests for
- all the PCI root bridges and
submitting these requests using
- SubmitResources(). This function
pads the resource amount
- to suit the root bridge hardware,
takes care of dependencies between
- the PCI root bridges, and calls the
Global Coherency Domain (GCD)
- with the allocation request. In the
case of padding, the allocated range
- could be bigger than what was
requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to
decode previously allocated
- resources (proposed resources) for
all the PCI root bridges. After the
- hardware is programmed, reassigning
resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were
previously allocated for all the PCI
- root bridges and resets the I/O and
memory apertures to their initial
- state. The bus settings are not
affected. If the request to allocate
- resources fails, the PCI enumerator
can use this notification to
- deallocate previous resources,
adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is
completed. No specific action is
- required here. This notification can
be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time.
For example, this error
- is valid for a Phase of
EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for
one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
- This error is valid for a Phase of
EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests
cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any
errors.
+ These are the notifications from the PCI bus driver that it is about to enter
+ a certain phase of the PCI enumeration process.
+ This member function can be used to notify the host bridge driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Eight notification points are
+ defined at this time. See belows:
+
+ EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures
+ and internal data structures. The PCI
+ enumerator should issue this
+ notification before starting a fresh
+ enumeration process. Enumeration
+ cannot be restarted after sending any
+ other notification such as
+ EfiPciHostBridgeBeginBusAllocation.
+
+ EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to
+ begin. No specific action is required
+ here. This notification can be used to
+ perform any chipset-specific
+ programming.
+
+ EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming
+ phase is complete. No specific action
+ is required here. This notification
+ can be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeBeginResourceAllocation
+ The resource allocation phase is about
+ to begin. No specific action is
+ required here. This notification can
+ be used to perform any
+ chipset-specific programming.
+
+ EfiPciHostBridgeAllocateResources Allocates resources per previously
+ submitted requests for all the PCI
+ root bridges. These resource settings
+ are returned on the next call to
+ GetProposedResources(). Before calling
+ NotifyPhase() with a Phase of
+ EfiPciHostBridgeAllocateResource, the
+ PCI bus enumerator is responsible for
+ gathering I/O and memory requests for
+ all the PCI root bridges and
+ submitting these requests using
+ SubmitResources(). This function pads
+ the resource amount to suit the root
+ bridge hardware, takes care of
+ dependencies between the PCI root
+ bridges, and calls the Global
+ Coherency Domain (GCD) with the
+ allocation request. In the case of
+ padding, the allocated range could be
+ bigger than what was requested.
+
+ EfiPciHostBridgeSetResources Programs the host bridge hardware to
+ decode previously allocated resources
+ (proposed resources) for all the PCI
+ root bridges. After the hardware is
+ programmed, reassigning resources will
+ not be supported. The bus settings are
+ not affected.
+
+ EfiPciHostBridgeFreeResources Deallocates resources that were
+ previously allocated for all the PCI
+ root bridges and resets the I/O and
+ memory apertures to their initial
+ state. The bus settings are not
+ affected. If the request to allocate
+ resources fails, the PCI enumerator
+ can use this notification to
+ deallocate previous resources, adjust
+ the requests, and retry allocation.
+
+ EfiPciHostBridgeEndResourceAllocation The resource allocation phase is
+ completed. No specific action is
+ required here. This notification can
+ be used to perform any chipsetspecific
+ programming.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] Phase The phase during enumeration
+
+ @retval EFI_NOT_READY This phase cannot be entered at this time. For
+ example, this error is valid for a Phase of
+ EfiPciHostBridgeAllocateResources if
+ SubmitResources() has not been called for one
+ or more PCI root bridges before this call
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ This error is valid for a Phase of
+ EfiPciHostBridgeSetResources.
+
+ @retval EFI_INVALID_PARAMETER Invalid phase parameter
+
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources. This error is valid for a
+ Phase of EfiPciHostBridgeAllocateResources if
+ the previously submitted resource requests
+ cannot be fulfilled or were only partially
+ fulfilled.
+
+ @retval EFI_SUCCESS The notification was accepted without any
+ errors.
**/
EFI_STATUS
EFIAPI
@@ -143,26 +189,38 @@ NotifyPhase(
);
/**
- Return the device handle of the next PCI root bridge that is associated
with this Host Bridge.
+ Return the device handle of the next PCI root bridge that is associated with
+ this Host Bridge.
- This function is called multiple times to retrieve the device handles of
all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is
associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous
call is passed into the
- interface, and on output the interface returns the device handle of the
next PCI root bridge. The
- caller can use the handle to obtain the instance of the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report,
the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the
order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
+ This function is called multiple times to retrieve the device handles of all
+ the PCI root bridges that are associated with this PCI host bridge. Each PCI
+ host bridge is associated with one or more PCI root bridges. On each call,
+ the handle that was returned by the previous call is passed into the
+ interface, and on output the interface returns the device handle of the next
+ PCI root bridge. The caller can use the handle to obtain the instance of the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more
+ PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI
+ enumerator must enumerate the PCI root bridges in the order that they are
+ returned by this function.
- @param[in] This The instance pointer of
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next
PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then
return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in
specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that
was
- returned on a previous call to
GetNextRootBridge().
+ For D945 implementation, there is only one root bridge in PCI host bridge.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in, out] RootBridgeHandle Returns the device handle of the next PCI
+ root bridge.
+
+ @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then
+ return the first Rootbridge handle of the
+ specific Host bridge and return EFI_SUCCESS.
+
+ @retval EFI_NOT_FOUND Can not find the any more root bridge in
+ specific host bridge.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
+ returned on a previous call to
+ GetNextRootBridge().
**/
EFI_STATUS
EFIAPI
@@ -170,45 +228,65 @@ GetNextRootBridge(
IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
IN OUT EFI_HANDLE *RootBridgeHandle
);
-
+
/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root
bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from
the decode-related
- attributes that are returned by the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root
bridge. The device
- handles of all the root bridges that are associated with this host bridge
must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do
not change during or
- after the enumeration process. The hardware may provide mechanisms to
change the attributes on
- the fly, but such changes must be completed before
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine
multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the
PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory
pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------
----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the
PCI root bridge does not support separate
- windows for nonprefetchable
and prefetchable memory. A PCI bus
- driver needs to include
requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the
PCI root bridge supports 64-bit memory
- windows. If this bit is not
set, the PCI bus driver needs to include
- requests for a 64-bit memory
address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in
which the caller is interested. Type
- EFI_HANDLE is defined in
InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it
is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root
bridge.
-
-**/
+ Returns the allocation attributes of a PCI root bridge.
+
+ The function returns the allocation attributes of a specific PCI root bridge.
+ The attributes can vary from one PCI root bridge to another. These attributes
+ are different from the decode-related attributes that are returned by the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
+ RootBridgeHandle parameter is used to specify the instance of the PCI root
+ bridge. The device handles of all the root bridges that are associated with
+ this host bridge must be obtained by calling GetNextRootBridge(). The
+ attributes are static in the sense that they do not change during or after
+ the enumeration process. The hardware may provide mechanisms to change the
+ attributes on the fly, but such changes must be completed before
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted
+ values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
+ "Related Definitions" below. The caller uses these attributes to combine
+ multiple resource requests.
+
+ For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI
+ bus enumerator needs to include requests for the prefetchable memory in the
+ nonprefetchable memory pool and not request any prefetchable memory.
+
+ Attribute Description
+ ------------------------------------ ---------------------------------------
+ EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root
+ bridge does not support separate
+ windows for nonprefetchable and
+ prefetchable memory. A PCI bus driver
+ needs to include requests for
+ prefetchable memory in the
+ nonprefetchable memory pool.
+
+ EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root
+ bridge supports 64-bit memory windows.
+ If this bit is not set, the PCI bus
+ driver needs to include requests for a
+ 64-bit memory address in the
+ corresponding 32-bit memory pool.
+
+ @param[in] This The instance pointer of
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+
+ @param[in] RootBridgeHandle The device handle of the PCI root bridge in
+ which the caller is interested. Type
+ EFI_HANDLE is defined in
+ InstallProtocolInterface() in the UEFI 2.0
+ Specification.
+
+ @param[out] Attributes The pointer to attribte of root bridge, it is
+ output parameter
+
+ @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
+
+ @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
+
+ @retval EFI_SUCCESS Success to get attribute of interested root
+ bridge.
+**/
EFI_STATUS
EFIAPI
GetAttributes(
@@ -216,21 +294,28 @@ GetAttributes(
IN EFI_HANDLE RootBridgeHandle,
OUT UINT64 *Attributes
);
-
+
/**
- Sets up the specified PCI root bridge for the bus enumeration process.
+ Sets up the specified PCI root bridge for the bus enumeration process.
- This member function sets up the root bridge for bus enumeration and
returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor
format.
+ This member function sets up the root bridge for bus enumeration and returns
+ the PCI bus range over which the search should be performed in ACPI 2.0
+ resource descriptor format.
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_
PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus
resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+ @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
+
+ @param[out] Configuration Pointer to the pointer to the PCI bus resource
+ descriptor.
+
+ @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
+
+ @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
+
+ @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
**/
EFI_STATUS
EFIAPI
@@ -239,30 +324,52 @@ StartBusEnumeration(
IN EFI_HANDLE RootBridgeHandle,
OUT VOID **Configuration
);
-
+
/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI
bus range.
-
- This member function programs the specified PCI root bridge to decode the
bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource
descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_
PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be
programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI
2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0
resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid
ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this
root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this
root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was
programmed.
+ Programs the PCI root bridge hardware so that it decodes the specified PCI
+ bus range.
+ This member function programs the specified PCI root bridge to decode the bus
+ range that is specified by the input parameter Configuration.
+ The bus range information is specified in terms of the ACPI 2.0 resource
+ descriptor format.
+
+ @param[in] This The
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance
+
+ @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be
+ programmed
+
+ @param[in] Configuration The pointer to the PCI bus resource descriptor
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI
+ 2.0 bus resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource
+ descriptors other than bus descriptors.
+
+ @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid
+ ACPI resource descriptors.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this
+ root bridge.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+
+ @retval EFI_SUCCESS The bus range for the PCI root bridge was
+ programmed.
**/
EFI_STATUS
EFIAPI
@@ -271,31 +378,52 @@ SetBusNumbers(
IN EFI_HANDLE RootBridgeHandle,
IN VOID *Configuration
);
-
+
/**
- Submits the I/O and memory resource requirements for the specified PCI root
bridge.
-
- This function is used to submit all the I/O and memory resources that are
required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the
following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory
resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory
resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a
PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or
more resource types that are
- not supported by this PCI root bridge. This
error will happen if the caller
- did not combine resources according to
Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this
PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for
this PCI root bridge.
+ Submits the I/O and memory resource requirements for the specified PCI root
+ bridge.
+ This function is used to submit all the I/O and memory resources that are
+ required by the specified PCI root bridge. The input parameter Configuration
+ is used to specify the following:
+ - The various types of resources that are required
+ - The associated lengths in terms of ACPI 2.0 resource descriptor format
+
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory
+ resource requirements are being submitted.
+
+ @param[in] Configuration The pointer to the PCI I/O and PCI memory
+ resource descriptor.
+
+ @retval EFI_SUCCESS The I/O and memory resource requests for a PCI
+ root bridge were accepted.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+
+ @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI
+ 2.0 resource descriptor.
+
+ @retval EFI_INVALID_PARAMETER Configuration includes requests for one or
+ more resource types that are not supported by
+ this PCI root bridge. This error will happen
+ if the caller did not combine resources
+ according to Attributes that were returned by
+ GetAllocAttributes().
+
+ @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
+
+ @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI
+ root bridge.
+
+ @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for
+ this PCI root bridge.
**/
EFI_STATUS
EFIAPI
@@ -304,26 +432,38 @@ SubmitResources(
IN EFI_HANDLE RootBridgeHandle,
IN VOID *Configuration
);
-
+
/**
Returns the proposed resource settings for the specified PCI root bridge.
- This member function returns the proposed resource settings for the
specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a
Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are
allocated
+ This member function returns the proposed resource settings for the
+ specified PCI root bridge. The proposed resource settings are prepared when
+ NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources.
+ The output parameter Configuration specifies the following:
+ - The various types of resources, excluding bus resources, that are
+ allocated
- The associated lengths in terms of ACPI 2.0 resource descriptor format
- @param[in] This Pointer to the
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE
is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and
memory resource descriptor.
-
+ @param[in] This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is
+ defined in InstallProtocolInterface() in the
+ UEFI 2.0 Specification.
+
+ @param[out] Configuration The pointer to the pointer to the PCI I/O and
+ memory resource descriptor.
+
@retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
handle.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
@retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
+ lack of resources.
**/
EFI_STATUS
EFIAPI
@@ -334,31 +474,46 @@ GetProposedResources(
);
/**
- Provides the hooks from the PCI bus driver to every PCI controller
(device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to
preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific
action is expected from this
- member function. It allows the host bridge driver to preinitialize
individual PCI controllers before
- enumeration.
-
- @param This Pointer to the
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type
EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0
Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This
address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions
to access the PCI
- configuration space of the device. See Table 12-1
in the UEFI 2.0 Specification for
- the definition of
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root
bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined
in
-
EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware
error. The PCI enumerator should
- not enumerate this device, including its
child devices if it is a PCI-to-PCI
- bridge.
+ Provides the hooks from the PCI bus driver to every PCI controller
+ (device/function) at various stages of the PCI enumeration process that allow
+ the host bridge driver to preinitialize individual PCI controllers before
+ enumeration.
+ This function is called during the PCI enumeration process. No specific
+ action is expected from this member function. It allows the host bridge
+ driver to preinitialize individual PCI controllers before enumeration.
+
+ @param This Pointer to the
+ EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
+ instance.
+
+ @param RootBridgeHandle The associated PCI root bridge handle. Type
+ EFI_HANDLE is defined in InstallProtocolInterface()
+ in the UEFI 2.0 Specification.
+
+ @param PciAddress The address of the PCI device on the PCI bus. This
+ address can be passed to the
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to
+ access the PCI configuration space of the device.
+ See Table 12-1 in the UEFI 2.0 Specification for the
+ definition of
+ EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
+
+ @param Phase The phase of the PCI device enumeration.
+
+ @retval EFI_SUCCESS The requested parameters were returned.
+
+ @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge
+ handle.
+
+ @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined
+ in
+ EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
+
+ @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
+ The PCI enumerator should not enumerate this
+ device, including its child devices if it is
+ a PCI-to-PCI bridge.
**/
EFI_STATUS
EFIAPI
@@ -371,7 +526,7 @@ PreprocessController (
//
-// Define resource status constant
+// Define resource status constant
//
#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
@@ -482,7 +637,6 @@ typedef struct {
@param ResAperture ResourceAperture for host bridge
@retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
**/
EFI_STATUS
RootBridgeConstructor (
--
1.8.3.1
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
