Hi, The 2 are related... you can in fact use any of the following in the lts.conf:
True, true, False, false, Yes, yes, No, no The second part of the question is more difficult On Mon, Oct 13, 2008 at 3:02 PM, Uwe Geercken <[EMAIL PROTECTED]> wrote: > hi and "Moin, Moin" > > I am a little bit puzzled now: some documentation I found on lts.conf > tlaks about: > > USE_NBD_SWAP=Y|N > > you and other sources talk about > > NBD_SWAP=True|False > > which one should I use in ltsp5. > > > also, so far my biggest problems are on the network side. what is the > easiest way of monitoring the traffic volume on the network between > the server and the clients? I would like to use this to determine if > certain changes to settings are better or worst. also I could use it > to monitor application traffic. > > tks for help. > > uwe > > > > > > > Zitat von Kai Wüstermann <[EMAIL PROTECTED]>: > >> Moin Uwe and Ken! >> >> You only need NBD-swap if your client-RAM is lower than 256mB. My >> experences on gutsy showed, that I could switch of NBD-swap on clients >> with 128mB saving network traffic. >> >> It should be a dirty, but fast fix to switch off the swap with >> NBD_SWAP = false. >> >> The updated documentation >> http://wiki.ltsp.org/twiki/bin/view/Ltsp/LtspDocumentationUpstream >> says: >> >> 3.1.4. Thin Client Ram >> The bare minimum for a thin client to work is about 48MB, but it will be >> unusably slow, so it is recommended to install at least 128MB Ram, with >> 256MB Ram if you can spare it. This will really help speed up thin >> clients. >> >> If you have a root password in your chroot, you can lock on the terminal >> (Alt+F1) on the client and use free -m to look if the client uses any >> swap. >> >> Kai Wüstermann >> >> > > > > -- > edubuntu-users mailing list > [email protected] > Modify settings or unsubscribe at: > https://lists.ubuntu.com/mailman/listinfo/edubuntu-users > -- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
