Le mercredi 05 novembre 2008 à 13:06 -0800, Joseph Hartman a écrit : > Hi all, I am trying to use Xubuntu 8.10 as an LTSP server and with > this new network manager in xfce I can't figure out how to setup the > second NIC (the one connecting to the switch) correctly. > > I tried changing the eth0 card from automatic (DHCP) to manual and > then added 192.168.0.1 as the IP address and 255.255.255.0 as the > subnet mask, but then I have to put something in for the gateway > before I can click "OK". I tried putting in 0 for the gateway and that > let me proceed, but then when I check on the settings again it has my > gateway as 0.0.0.0 and my subnet mask as 24. Trying this setup my thin > clients aren't booting even though the connection information says > both cards are active and even after I sudo ltsp-update-sshkeys. When > I restart the computer all the settings for eth0 are reset to > automatic (DHCP) too. Can anyone help me just set this second NIC card > to 192.168.0.1 and keep it that way? Thanks -joe
I did'nt try ltsp on 8.10 yet but as far as I know, you have to use eth0 for thin-clients network and eth1 for the internet because dhcp3-server has a start-on test on eth0. I use this little script to ensure dhcp is running. I had no problem with leaving the gateway field blank. Hope it could help, François
g-dhcpd
Description: application/shellscript
-- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
