I am confused. Do you have 2 NICs in your LTSP, one connected to a switch which all your thin clients connect to, and one connected to the rest of your internal network? Or do you have only one NIC and every device thin client or not shares the same network address range?
In my setup I have 2 NICs as above and as long as they use different address ranges everything is fine. --- On Sun, 1/25/09, Butch Arias <[email protected]> wrote: > From: Butch Arias <[email protected]> > Subject: Changing IP address of DHCP and LTSP servers > To: [email protected] > Date: Sunday, January 25, 2009, 12:07 AM > Dear Users, > > With a hardware change, our gateway was also changed from > 192.168.0.1 to > 192.168.1.1. I assume that this would mean we need to > change the DHCP server > from 192.168.0.X to 192.168.1.X. I have seen posts changing > from 192.168.0.X > to 192.168.0.Y, should I use the same procedure? I want the > DHCP server > (which is also the LTSP, File, and Print-server) to use > 192.168.1.X in order > to use our new gateway. > > The gateway's IP address could not be changed to > 192.168.0.X (hardware > reasons) which means it will be the DHCP/LTSP Edubuntu > server's IP > cpnfigurations would need the IP address changed. Ideally, > the range of the > address to be used should be from 192.168.1.200 through > 192.168.1.250 (for > the Edubuntu in the computer laboratory) as the lower > numbers are reserved > for the other departments and wireless users. > > Should I anticipate any problems in this change of IP > address of the > Edubuntu server? Thank you in advance. > > Butch Arias > > Saint Philomena School > Lucena City, Philippines > -- > edubuntu-users mailing list > [email protected] > Modify settings or unsubscribe at: > https://lists.ubuntu.com/mailman/listinfo/edubuntu-users -- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
