Asmo Koskinen kirjoitti: > I try this new howto with 8.04.2 (two nics) and if Jammin 125 works well > I add that to the UbuntuLTSP as a howto for Hardy.
I promised too much. I have lost the power cable for Jammin 125 and then I run to the errors: PXE-T01: File Not Found PXE-E3B: TFTP Error - File Not Found LTSP5 side/pool worked well after installation steps, but LTSP 4.2 side/pool did not find it's kernel. I did install nfs-kernel-server -package and added a line to the exports file. ---- Anyway, there was something good. My second lowest thin client, VIA-based sort of DIY thin client, booted to the LTSP5. Good to know after all. r...@ltsp:~# dmesg [ 0.000000] Detected 533.397 MHz processor. [ 26.940406] CPU0: Centaur VIA Samuel 2 stepping 03 [ 35.655484] eth0: VIA Rhine II at 0xe3000000 [ 51.502315] agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset ---- So if you really really needs very old thin clients to boot beside newer ones try yourself this howto: "This was tested on Debian Lenny (stable)." http://wiki.ltsp.org/twiki/bin/view/Ltsp/Ltsp5SameServerLTSP42 Best Regards Asmo Koskinen. -- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
