What I'm running into are a few things...and I'm sure I'm just missing something. First...I've disabled the other onboard NIC on the server....it doesn't get and address, but ifconfig still shows it's there. I also need to change the default addressing scheme for DHCP to a 10.0.0.x network. I did that and it seemed to break something so that the thin-clients don't finish booting....they get the Edubuntu splash screen, but end with an initramfs message. I haven't gotten into it too far...so I have not troubleshot that issue. Nonetheless, I'm also able to ping, but unable to resolve. In other words....ping 10.0.0.1 works fine (10.0.0.1 is my firewall/router for the LAN)...yet ping abc.com doesn't...nor does firefox go to any web sites (although it will go to IP addresses)....so I'm guessing it's not resolving. So...what do I need to change and watch out for when changing the network addressing from the default 192.168.x.x to 10.0.x.x. I'm pretty sure I had most everything...the server has the right address....
Not 100% sure where everything lives now. Thought about editing /etc/resolv.conf manually, but it doesn't seem like anything is in there Any ideas welcome Mike Biancaniello <[email protected]> writes: > I run a single NIC system. In previous versions, you had to jump through >some hoops to use the installer, but I just installed 12.04 on a single >NIC system and it worked great. My edubuntu install also acts as the DHCP >for everything. What issues are you running into? > >---------------------------------------------------------------------------From: >David Trask <[email protected]> >To: edubuntu-users <[email protected]> >Sent: Monday, July 23, 2012 at 8:31 pm >Subject: Single NIC install of Edubuntu > >Hi! > >I've been doing Linux Terminal Servers for a long time...K12LTSP and even >Edubuntu. I'm now coming back to Edubuntu after using Resara for a few >years. Here's my scenario.... > >I have a huge server...no issues there. Quad processors...each quad >core...24GB RAM....multiple fast hard drives...gig nics...etc. I'm >trying to keep it simple. (most of my switches are unmanaged gigabit >switches...so channel bonding may not be an easy idea..) I'm trying to >do a single NIC install. This server will also be the DHCP server for my >entire network. I can't seem to find the documentation for setting this >up (single NIC that is) I thought I had it, but now I'm having issues >getting to the internet from the clients and even the server. Can anyone >point me in the right direction? I have done a single NIC install before >with K12LTSP...and probably even Edubuntu, but I cannot seem to find the >documentation I used and I'm running into what should be simple issues. > Any ideas are welcome. > >David Trask >Technology Director/Teacher >Vassalboro Community School >[ mailto:[email protected] ][email protected] >(207) 923-4305 > >-- >edubuntu-users mailing list >[ mailto:[email protected] ][email protected] >Modify settings or unsubscribe at: [ >https://lists.ubuntu.com/mailman/listinfo/edubuntu-users >]https://lists.ubuntu.com/mailman/listinfo/edubuntu-users edu David Trask Technology Director/Teacher Vassalboro Community School [email protected] (207) 923-4305
-- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
