yeah - it's the same problem on the 1000HE without the atge tested all the way up to snv_118 .. here's the dump from a uadmin 3 22 suspend: Jul 25 15:26:41 opensolaris genunix: [ID 535284 kern.notice] System is being suspended Jul 25 15:26:43 opensolaris acpica: [ID 530733 kern.notice] NOTICE: acpica_ddi_setwake: could not evaluate _PRW Jul 25 15:26:46 opensolaris last message repeated 3 times Jul 25 15:26:48 opensolaris atge: [ID 130221 kern.info] atge0: Atheros AR8121/8113/8114 (vid: 0x1969, did: 0x1026, revid: 0xb0) Jul 25 15:26:49 opensolaris unix: [ID 954099 kern.info] NOTICE: IRQ16 is being shared by drivers with different interrupt levels. Jul 25 15:26:49 opensolaris This may result in reduced system performance. Jul 25 15:26:49 opensolaris syseventd[109]: [ID 555171 daemon.error] Fatal:attempting to dump core Jul 25 15:26:49 opensolaris genunix: [ID 543013 kern.warning] WARNING: Bad driver ioctl number, 0x18 (of 0x12) Jul 25 15:26:49 opensolaris last message repeated 2 times Jul 25 15:26:50 opensolaris cpr: [ID 208601 kern.notice] Jul 25 15:26:50 opensolaris The system is back where you left! Jul 25 15:26:50 opensolaris genunix: [ID 583038 kern.notice] System has been resumed.
noticed that the intel acpica code has been updated to 20090625 and we still seem to be on 20090521 .. and it appears that the Bad driver ioctl number is coming off a DRM_ERROR btw - what's your vendor and device id for the wireless card on the 1008ha? .. i've got a 0x1814,0x0781 ralink from the scanpci output - seems to bind fine in the dev releases to rwn, but not so sure i'm getting 802.11n speeds out of it .. --- .je On Jul 25, 2009, at 10:24 AM, Joseph Mocker wrote: > I did not have the atge driver loaded (I found that after I did the > suspend/resume tests). I do have the a arn driver loaded though. > Although the 1008HA appears to have a Atheros wifi chipset in it, its > not supported with the ath driver. I could try unplumbing it. > > --joe > > Masa Murayama wrote: >> ----- Original Message ----- >> >>> Date: Fri, 24 Jul 2009 12:49:03 -0700 >>> From: Joseph Mocker <mock at sun.com> >>> To: eeepc-discuss at opensolaris.org >>> Subject: [eeepc-discuss] 1008HA + 2009.06 will suspend, won't >>> resume - help! >>> >>> >>> Hello, >>> >>> New to the whole EeePC scene, just got 2009.06 installed on a Eee >>> 1008HA. Needed to install the ARN wifi driver but other than that is >>> just a "stock" install. >>> >>> Now grappling with suspend/resume. After adding "S3-support >>> enable" to >>> power.conf, I was able to suspend the netbook, but resuming didn't >>> work >>> so well. It appeared that the power was on, but no video came back. >>> >>> Not quite sure that the typical debugging scenario is for this. Any >>> pointers would be great. I did see a post mentioning running >>> uadmin 3 >>> 21, which returned 0 for me, and uadmin 3 22, which worked for me as >>> well, excepted the touchpad didn't work. Appears to be the same >>> situation as at least one user with the 1000HE - >>> http://mail.opensolaris.org/pipermail/eeepc-discuss/2009-July/000292.html >>> >>> Any information on how to debug this would be great. Thanks. >>> >>> --joe >>> >> >> joe, >> >> I heard that eeepc with atge driver hanged on resume. >> Do you use atge? If yes, would you unplumb atge0 before suspend? >> >> -masa >> >> >>> _______________________________________________ >>> eeepc-discuss mailing list >>> eeepc-discuss at opensolaris.org >>> http://mail.opensolaris.org/mailman/listinfo/eeepc-discuss >>> > > _______________________________________________ > eeepc-discuss mailing list > eeepc-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/eeepc-discuss
