The trixbox has always been set up on an internal IP. Before it was behind a d-link router that I removed and replaced with the endian firewall. The trixbox's IP address has not changed. Behind the d-link router I could make outbound calls using my telasip trunk with no issues, as soon as I replaced the D-link router with the endian firewall the telasip trunk was broken. The ports that I am forwarding are:
IAX 4569 TCP/UDP RTP 10001-10300 TCP/UDP SIP 5004-5082 TCP/UDP The phones work correctly when I use the internal IP of the trixbox 192.168.0.9 but dont work when i use the domain name. They work externally using the domain name wich is expected. I can call extension to extension but I can not use my telasip trunk, I keep getting a message that all circuts are busy please try again later on the inside when I try to use it, and when I try to use it externally it just rings and rings in my headset but never rings the destiantion phone. Jake Vickers-2 wrote: > > rbull wrote: >> I have a trixbox ([EMAIL PROTECTED]) server set up on the green interface. >> Before I set up my endian firewall the trixbox would work perfectly. The >> phones registered and I was able to use my SIP trunk to make outbound >> calls. >> After I installed the endian firewall and forwarded the proper ports >> however, I can't use the outbound trunk for calls anymore. I keep >> getting a >> message that all circuts are busy. I can still call extension to >> extension. >> Also before I installed the firewall I was able to hit the asterisk box >> from >> the outside and the inside by using our domain name, now I can only hit >> it >> by domain name on the outside, and have to use the internal IP address on >> the inside. I would like to get this back to only having to use the >> domain >> name to hit the box from both inside and outside. Any help would be >> appreciated. >> > I run a Trix behind Endian myself. If you had the Trix on a public IP > and moved it to a private IP, then you'll probably have to set up an > internal DNS server. You'll need to program the phones for the Trix's > real IP, not the domain name. Otherwise it's trying to go out, then back > in. > And you must have some ports set wrong. Do you have NAT turned on in > your SIP box? > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Efw-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/efw-user > > -- View this message in context: http://www.nabble.com/Trixbox-and-endian-tf2177079.html#a6020150 Sent from the efw-user forum at Nabble.com. ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
