Hi, I have problem setting up EFW-2.0 on a HP ML110 server with additional 4-port ethernet card. Here is the lspci output of the ethernet "cards"
07:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705_2 Gigabit Ethernet (rev 03) I assume the first is the on-board one and the second is the 4-port thing. In fact Endian sees 2 devices eth0 and eth1, and they seem to work, but no further. What should I do/configure there? All unused ports are unplugged now, because as I plugged them in, after several seconds they started to do something crazily and flooded the switch so much that our network went down :) Better I unplugged it then :) So what I have to do to bring the other 3 ports up? Thanks in advance, Akos -- Üdvözlettel, Gábriel Ákos -=E-Mail :[EMAIL PROTECTED]|Web: http://www.i-logic.hu=- -=Tel/fax:+3612367353/200 |Mobil:+36209278894 =- ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
