I am need of configuring a Linksys RV042 VPN Router to connect using IPSec
with a Net to Net connection to an Endian 2.1 Firewall. Is this possible?
I've messed with so many settings and can't see to get it to connect. Inside
of my /var/log/messages I get this error on an continual basis:
May 25 13:12:51 apache-firewall pluto[8825]: |
May 25 13:12:51 apache-firewall pluto[8825]: | *received 80 bytes from
68.16.205.33:500 on eth1 (port=500)
May 25 13:12:51 apache-firewall pluto[8825]: packet from 68.16.205.33:500:
initial Main Mode message received on 75.66.109.53:500 but no connection has
been authorized
Here is my setup
Linksys RV042 Router 1.3.8.2
Local Group Setup
External IP: 68.16.205.33
Local Network: 192.168.0.0/255.255.255.0
Remote Group Setup
External IP: 75.66.109.53
Local Network: 192.168.20.0/255.255.255.0
IPSec Setup
Keying Mode: IKE With Pre-Shared Key
Phase1 DH Group: Group1
Phase1 Encryption: 3DES
Phase1 Authentication: MD5
Phase1 SA Life Time: 28800 Seconds
Perfect Forward Secrecy: Off
Phase2 DH Group: Group1
Phase2 Encryption: 3DES
Phase2 Authentication: MD5
Phase2 SA Life Time: 28800 Seconds
PreShared Key: 563149gcda56fftt6aa
Advanced
Aggressive Mode = off
Compress (Support IP Payload Compression Protocol(IPComp)) = off
Keep-Alive = off
AH Hash Algorithm = off
NetBIOS Broadcast = off
NAT Traversal = off
Dead Peer Protection = off
Endian FW 2.1
IPSEC Tab ==>
Global Settings - Net to Net Connection
Local VPN Hostname/IP: 75.66.109.53
Enabled checkbox is clicked
Connection Name: Admin
Endian Firewall Side: left
Remote Host IP: 68.16.205.33
Local Subnet: 192.168.20.0/255.255.255.0
Remote Subnet: 192.168.0.0/255.255.255.0
Use Pre-Shared Key: 563149gcda56fftt6aa
Advanced
Compression: off
IKE Encryption: 3DES
IKE Integrity: MD5
IKE Lifetime: 8 Hours
IKE Grouptype: MODP-768
ESP Encryption: 3DES
ESP Integrity: MD5
ESP KeyLife: 8 Hours
ESP Grouptype: Phase1 Group
Use Only Propossed Settings: off
If you have dealt with this setup or a simliar one before or can see where
my error might be and can lend some advice, I would greatly appreciate that.
thanks
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
