With the help of another Endian user Thomas Heimann, I was able to get my
Linksys RV042 to connect to my Endian 2.1 over an IPSEC VPN. Here are the
settings I used from the Endian and Linksys firewalls.
On the Linksys here are my settings and as you can see these don't include
the obvious things like local subnet and remote IP. Thats easy enough to
figure out:
IPSEC Setup:
Keying Mode: IKE with Preshared key
Phase1 DH Group: Group2
Phase1 Encryption: 3DES
Phase1 Authentication: SHA1
Phase1 SA Life Time: 28800
Perfect Forward Secrecy: unchecked
Phase2 Encryption: 3DES
Phase2 Authentication: SHA1
Phase2 SA Life Time: 28800
Pre-Shared Key: xxxxxx
Advanced:
Aggressive Mode: unchecked
Compress: unchecked
Keep Alive: unchecked
AH Hash Algorithm unchecked
NetBIOS Broadcast: unchecked
Nat Traversal: checked
Dead Peer Detection: 30 Seconds
Here are my Advanced Endian Settings. The other stuff like local subnet and
remote host is self explanatory.
Compression: unchecked
IKE Encryption: 3DES
IKE Integrity: SHA1
IKE Lifetime: 8 hours
IKE Group Type: MODP-1024
ESP Encryption: 3DES
ESP Integrity: SHA1
ESP Keylife: 8 Hours
ESP Group Type: Phase1 Group
Use Only Proposed Settings: checked
That will take care of it. I wrote this because I believe in Endian and it's
"awesomeness" and furthering the Endian community.
enjoy
jesse
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
