On my test setup, the VLAN is as follows: Network: X.X.X.128/25 Broadcast: X.X.X.255 HostMin: X.X.X.129 HostMax: X.X.X.254 Hosts/Net: 126
This is the same as in production (The X.X.X part differs, that's all). In the labo the X.X.X part is actually a screened LAN used to simulate the internet. In both configurations the client PC's can connect to the internet and port forwarding from the internet towards the client machines work fine... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of compdoc Sent: zondag 9 september 2007 23:44 To: [email protected] Subject: Re: [Efw-user] OpenVPN Net2Net problem... So, your two labo machines are client PCs behind the firewalls. I see. You mention "The RED interfaces of the two EFWs are connected to the same switch." On your test setup, is that subnet of the 'same switch' actually X.X.X.219 & X.X.X.250, GW X.X.X.129, and mask 255.255.255.128? Or are you using some other subnet? ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
