That's a pretty typical configuration. You can use port forwarding to forward the VPN port to the efw, or, you could place the efw in a DMZ.
Either way, you have to make a change to the router... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephane Parenton Sent: Thursday, March 20, 2008 6:34 AM To: [email protected] Subject: [Efw-user] vpn and nat on router Hi everyone... I have a problem configuring efw... here's the deal. I have a network with a server that need to be accessed from the outside world by only one specific computer, wherever it is. I would like to set a VPN between a network a a single computer. My first problem is that the network is behind EFW which is itself behind an ADSL modem router that is nated (and i can't do anything to cancel the nat)... Internet --> <--public IP / Adsl Router /192.168.x.1 --> <--192.168.x.2 / EFW / 192.168.y.1> <--Private network 192.168.y.0/255.255.255.0 As i cannot configure/change the modem/router, i cannot see wether there is filtering or not. What can I do to make the computer access the netwotk from the outside world ? i tried to use dyndns but failed in accessing from the outside (might have done something wrong...) Regards ------------------------------------------------------------ ------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
