Hi!  Here is the output of ethtool with  all the nics and the ifconfig
output, also i tried to switch the ethernet cable  but i got  the same
result,  i can't reach the page :-(
 

-----Mensaje original-----
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Gregory
Machin
Enviado el: Viernes, 08 de Agosto de 2008 07:02
Para: efw-user@lists.sourceforge.net
Asunto: Re: [Efw-user] I c an't configure nics on EFW 2.1.2

[EMAIL PROTECTED] wrote:
>
> Have you tried switching the Ethernet cables?  Perhaps the internal 
> nic isn't the one you think it is.
>
>  
>
> ----------------------------------------------------------------------
> --
>
> Hi!
>
> I just finished to install  EFW,  then  when i try to setup by  web 
> but  i dont reach the page, then i started with a shell console and 
> check the nics configuration
>
> I have the next   interfaces :
> br0    up with an ip 192.168.0.15  
> eth0  up with no ip
> eth1  up with no ip
> eth2  up with no ip
>
> The  EFW have a  green  ip address such 192.168.0.15,  i tried to 
> change the ip to another pc  192.168.0.16 but i can't reach the ip of 
> EFW
>
> After i tried to  assign an ip to eth0 interface  with no succes :-(
>
> Please Help me! :-)  how can i do to  reach the  setup page and begin 
> to test  EFW.
>
Hi
Please post the output from "ethtool eth0" and "ifconfig"


--
Gregory Machin
CT-Net
www.ct-net.org
[EMAIL PROTECTED]
phone : +27 12 379 3497
fax   : +27 12 379 4113
Cell  : +27 72 524 8096

humans do not use the address
below its for trapping spam. 
spamtrap  [EMAIL PROTECTED]


------------------------------------------------------------------------
-
This SF.Net email is sponsored by the Moblin Your Move Developer's
challenge
Build the coolest Linux based applications with Moblin SDK & win great
prizes
Grand prize is a trip for two to an Open Source event anywhere in the
world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user

ethtool eth0 output:


Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
        Advertised auto-negotiation: Yes
        Speed: 10Mb/s
        Duplex: Half
        Port: MII
        PHYAD: 24
        Transceiver: internal
        Auto-negotiation: on
        Current message level: 0x00000001 (1)
        Link detected: no






ethtool eth1 output:

Settings for eth1:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Half
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000033 (51)
        Link detected: no



ethtool eth2 output:

Settings for eth2:
No data available





ifconfig output:
br0       Link encap:Ethernet  HWaddr 00:0A:5E:05:8A:2E  
          inet addr:192.168.0.15  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth0      Link encap:Ethernet  HWaddr 00:0A:5E:05:8A:2E  
          UP BROADCAST PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:29 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:4626 (4.5 KiB)  TX bytes:0 (0.0 b)
          Interrupt:3 Base address:0xd800 

eth1      Link encap:Ethernet  HWaddr 00:08:54:30:7A:96  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:279 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:34110 (33.3 KiB)  TX bytes:0 (0.0 b)
          Interrupt:11 Base address:0x6000 

eth2      Link encap:Ethernet  HWaddr 00:0A:5E:5C:E8:B1  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1962 (1.9 KiB)  TX bytes:128 (128.0 b)
          Interrupt:5 Memory:ef000000-0 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:256 errors:0 dropped:0 overruns:0 frame:0
          TX packets:256 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:16896 (16.5 KiB)  TX bytes:16896 (16.5 KiB)

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user

Reply via email to