Hi Ermanno, Could you describe the 2 LAN segments more please? Are they 2 subnets on one broadcast domain (LAN), or is there a router separating the two? If you have only 2 VM adapters, then orange and blue should not be used. If the 2nd green subnet is behind a different router on the Green LAN, you only need to install a route on the firewall.
Shaun -----Original Message----- From: Ermanno [mailto:ermanno.nov...@gmail.com] Sent: Friday, April 03, 2009 4:18 AM To: efw-user@lists.sourceforge.net Subject: [Efw-user] routing with two different subnet Hi, i have a question about routing configuration of endian fw 2.2rc3. I have to link two different subnets, say 10.0.0.0/24 and 192.168.0.0/24, in the same lan with routing done by endian fw. My Endian installation is on a virtual machine, and i have two bridged networking used by endian, one on my green lan and one on my red (towards the router). The red is a different subnet and that's ok and my green is on 192.168.0.0/24; if i connect another bridged netowrking i can use a blue/orange zone on 10.0.0.0/24 but how can i use the endian routing section to configure this behaviour? I've tried this by configuring the routing section like source: 192.168.0.0/24 (my green) destination: 10.0.0.0/24 (my alternative subnet) static gateway: 192.168.0.253 (my endian) it is correct? any suggestion? Thank you in advance Ermanno ------------------------------------------------------------------------ ------ _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------------ _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
