Hi Eric, Under Network Configuration, you should be able to put multiple IP addresses that RED will listen for. Then in your forwarding rules, you choose which IP and port you want to forward to which internal host/port. Is that what you have set up now?
Shaun -----Original Message----- From: eric rosel [mailto:neuroticimbec...@yahoo.com] Sent: Friday, April 10, 2009 1:23 PM To: efw-user@lists.sourceforge.net Subject: [Efw-user] help with port-forwarding Hi All, I'm using Endian Firewall Community 2.2 RC3. I have only 2 zones (RED and GREEN). I have multiple public IP addresses on my RED interface. Port-forwarding only seems to work for the primary IP address of my RED interface. Are there additional configurations which need to be done in order to use my other public IP addresses for port-forwarding? BTW, the other public IP addresses I'm using seem to be "up". I logged-into the EFW box via ssh and did a "ping -I <public_IP>", using each of my public IP addresses; all of them got ping replies. TIA for any help, -eric ------------------------------------------------------------------------ ------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
