Been using EFW on small networks for years and looking into using it to replace a couple of Cisco PIX 515E firewalls that are currently linked via VPN on a larger 100 user network. I'm not overly familiar with Cisco and want something more easily manageable.
Using a vmware environment to test if EFW can meet the requirements before investing in hardware. I need to be able to setup 4 different zones with VPN links between some of the zones. I am trying to setup two different subnets on Green using two different NICs. Needless to say it's not working so I'm reducing to a basic config with 3 nics: 2 green (eth0 & eth2) w/ 1 IP & 1 red (eth1) w/ 1 IP. I have an XP VM that can ping the green IP when it is attached to the same virtual switch as eth0 but can not ping the green IP when it attached to the same virtual switch as eth2. If I remove eth0 from the green zone then the VM can ping the green IP from the eth2 switch. As soon as I re-add eth0 to the green zone I'm no longer able to ping the green IP via the eth2 switch but can the eth0 switch. Next step will be to take a computer, a laptop, & a crossover cable for my testing but before I do I wanted to know if anybody else had tried this yet on 2.4.1 and confirmed that it worked right. ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
