I would say double check your NAT setup and ensure that it is setup to work with your second IP address. Not sure why it would stop in 2.4.1, but I'll look into it in the next day or so with a few virtual machines.
Daniel Moree Systems Analyst [re]defining ready 300 East College Avenue | Hartsville, SC 29550 phone: (843) 383-8186 | help desk: (843) 383-8323 Become a Fan! - http://www.facebook.com/cokercollege http://www.coker.edu | http://support.coker.edu On 02/09/2011 06:13 PM, Max Veprinsky wrote: > Hello, > > To RED interface I have 2 IP addresses bound, both are on the same > subnet. Port forwarding (destination NAT) with the second IP address > is no longer working with 2.4.1. This was working with 2.3.0 > > Port forwarding however is working fine when using the primary IP on > RED. I can see in that traffic is coming in on endian with tcpdump, > but it's not making past the firewall. > > Please advise > Regards, > -- Max Confidentiality Note The information contained in this email message is being transmitted to and is intended only for the use of the individual named above. If the reader of this message is not the intended recipient, you are hereby advised that any dissemination, distribution or copy of this email is strictly prohibited. If you have received this email in error, please immediately notify us by telephone or email and delete this email message. ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
