Le vendredi 13 octobre 2006 à 09:02 +0200, Michel van der Kleij a écrit : > Well we have established contact for the first time. I had to re-run the > config assistant after the firewall update. So one system behind a firewall > and a few routers now "talks" to one that is both firewall and desktop. The > latter still says it can't login when it's started, but apparently this is not > a problem for communication. > > However, there is still work to do: audio sounds like a helicopter hovering > over the house without discernable human voice and I can't change webcam view > to see the other person (neither can he). Suggestions are obviously welcomed > and I'll attack this new challenge tonight ... > > Thanx so far!!! >
*sigh*, you seem having all the problems of the world :-/ A few steps to debug : 1) Make the audio test through the druid, and see if it works. 2) Try calling [EMAIL PROTECTED] with each of them and see if it works or not. Please note that there is a problem with ekiga.net right now, it is loosing packets. Anyway, you will see where the helicopter sounds comes from. 3) Try this : arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE - 4) Try also this : arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 16000 -f S16_LE - 5) Try using Default as device or direct access to the device. 6) Change codecs 7) If you can not see each other, either video transmission is disabled or you have a firewall dropping video packets -- _ Damien Sandras (o- //\ Ekiga Softphone: http://www.ekiga.org/ v_/_ FOSDEM 2006 : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
