Le samedi 20 janvier 2007 à 19:02 +0000, Anne Wilson a écrit : > On Saturday 20 January 2007 18:53, Damien Sandras wrote: > > Le samedi 20 janvier 2007 à 12:30 +0000, Anne Wilson a écrit : > > > On Saturday 20 January 2007 10:28, Damien Sandras wrote: > > > > Le vendredi 19 janvier 2007 à 17:51 +0000, Anne Wilson a écrit : > > > > > Can Ekiga be pointed at /dev/webcam, instead of /dev/video0? I can't > > > > > see where this can be done. > > > > > > > > No it can't. However, it should not be required. Ekiga will scan /dev > > > > for entries with the correct major and minor numbers for video, and > > > > hence detect all well configured devices. > > > > > > Thanks for the reply, Damien. Georgi added > > > > > > ... (if no /dev/video* devices are detected) ... > > > > > > There is often /dev/video0 and /dev/video1. I'm trying to use persistent > > > symlinks to get around this, with /dev/webcam being used to track which > > > video* the webcam is attached to. In the presence of all three of these, > > > will ekiga actually find the right connection? > > > > > > > > >From what I can see, it first reads /proc/video/dev and then /dev > > > > entirely, looking for devices with the expected major & minor numbers. > > > > If /dev/webcam has those numbers, I am sure Ekiga will find the device. > > If it is a symlink, it will probably ignore it and look for the real > > device instead. > > It has the device name and the major and minor numbers, so it sounds as > though > I shouldn't have too much problem.
Indeed. However, I think that it only scans through the whole /dev directory if and only if /proc/video/dev didn't return any results. Not sure though. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
