Le lundi 09 avril 2007 à 14:46 -0400, Jonathan D. Proulx a écrit : > Hi, > > I'm trying to setup Ekiga 2.0.3 (as shipped with Debian/Etch), for > VOIP and video conferencing. I'm having a bit of trouble with each. > > for VOIP I'm using sip through the institute gateway device which is > some cisco product I don't control. Incoming calls work fine. Out > going calls show weird behavior. If the call isn't answered on the > first ring I get an "abnormal call termination", if the call is > answered on the first ring the call will work for a short but > nondeterministic time and then end in the same bad way. > > Using an different soft phone (twinkle) out bound calls work fine. > Looking at tcp dumps of the connections in both cases I see significan > RTP traffic from the MIT sip server, with twinke there's also RTP > traffic from my host back while ekiga is silent. > > Any clue what's up with that? >
Can you post a -d 4 debug output somewhere ? > For video conferencing I'm using h.323 to an old Vtel system for > testing. Video quality is relatively poor (compated to teh Vtel > system) no mater how fancy a camera I connect. I think this is ddue > to the "Maximum video bandwidth" setting which is maxed at 100kB/s > where as the Vtel system will go upto 768. Can this be raised? > Not yet, but I think this is due to the poor unpatented codec we are forced to use. VTel certainly uses things like H.263+ or MPEG4 which are not free to use. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
