Le jeudi 12 avril 2007 à 13:46 +0200, Matej Cepl a écrit : > Damien Sandras <[EMAIL PROTECTED]> writes: > > > OK, I see two problems : > > 1) ALSA lib pcm_dmix.c:864:(snd_pcm_dmix_open) unable to open slave > > It appears that DMIX is giving your problems. Try using another ALSA > > device (either Default or direct access to the soundcard) in the Audio > > Devices part of the preferences. > > That's another problem -- I am trying to use pulseaudio through > alsa-pulse module. > > > You can enable codecs in the Audio Codecs part of the preferences. > > Yes, I did. However, the problem IMHO is that "Remote user > rejected call" in the attached log. > > Any ideas about that? >
CISCO sends back this message : SIP/2.0 503 Service Unavailable Date: Thu, 12 Apr 2007 11:40:34 GMT CSeq: 1 INVITE Unfortunately, I have no idea for that one. You can try several things, like disabling video for example, or calling another number. This debug can be of interest : Reason: Q.850;cause=63 Warning: 399 "Routing failed: ccbid=1655599 socket=10.32.4.78:5063" It is possible that the outgoing INVITE is rejected because it comes from port 5063 while the register was sent with source port 5061. In that case, it is a configuration problem on the CISCO side. I think you will have to refer to the admin of the call manager... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [EMAIL PROTECTED] http://mail.gnome.org/mailman/listinfo/ekiga-list
