Hi Damien,
I have very recently installed Ubuntu Feisty 7.04 on my second Hard Disc, which was previously vacant, and upgraded its Ekiga 2.0.3 to Version 2.0.11-2 from your website. Since trying to start this new version of Ekiga in Feisty I have been experiencing the same problem as Jim Ruxton. I configured Ekiga, using the Druid, with my existing login and password which I have been using successfully in Ubuntu Dapper, with Ekiga 2.0.9, which is installed on my other Hard Disc. I also configured my Diamondcard Account. But when I tried to connect to [EMAIL PROTECTED] the attempt failed. I understand from your comments that this is normal when Ekiga has not registered the user. So I went to "Accounts" and found my two accts. as follows: Box A ticked - ekiga.net SIP Service - SIP - Registration failed. Box A ticked - Ekiga PC-To Phone - SIP - Registration failed. I tried un-ticking and re-ticking Box A, in both cases, but the result was unchanged. I went to "General History" which reported that the registration attempts were "Timedout". I went back to "Accounts" and opened "Properties" of each account, in turn and found that "Timeout" was set to: 3600 in both. I checked all the other entries there and found them to be correct. It ocurred to me that this "new" Ekiga in Feisty might object to using the same registration which I established in the "old" Ekiga in Dapper. So in Feisty I configured a completely new registration, with new login and password, from the Druid page. Sumitting it, I received by return an email from ekiga.net, which I confirmed according to the instructions which it contained. Using the Druid, I reconfigured Ekiga with the new login and password. But registration failed exactly as before. I investigated everything as described above, but could not effect registration. So at the moment, my project is suspended and I would greatly appreciate your help to overcome this problem. You may remember me. I posted a message entitled: "Ekiga quits,(crashes ?), when I click on Webcam Icon, or on the Test Video Device button in the Druid", in Ekiga-List, Vol. 15, Issue 53. I received replies fom yourself, Killian Krause, Yannick and Paul O`Malley. I thank you all for your valuable help and to report that I followed your recommendations. I chose to install Feisty on my vacant second Hard Disc because Ekiga upgrade download files were already available on your website. I downloaded and installed the following: (In the order shown). libopal-2.2_2.2.11~dfsg1-2~feisty~ekiga.4583.i386.deb libpt-1.10.10_1.10.10.2~feisty~ekiga.4575.i386.deb libpt-1.10.10-plugins-alsa_1.10.10-2~feisty~ekiga.4575.i386.deb libpt-1.10.10-plugins-v4l_1.10.10-2~feisty~ekiga.4575.i386.deb libpt-1.10.10-plugins-v4l2_1.10.10-2~feisty~ekiga.4575.i386.deb ekiga_2.0.11-2~feisty~ekiga.12756_i386.deb I mention this in case there are other files I need, which I have not installed. Your advice is welcome. Finally, using Synaptic P.M., I downloaded: gspca-source and installed it using "module-assistant". This contains the driver which my webcam requires. All the downloading and installing processes were smooth and without errors. However, when I click on the webcam Icon, I still do not get a video image. The video screen opens in Ekiga and presents an image of a coloured, geometric matrix of cells, (pixcels ?), which looks like it might be the sensor! The webcam is obviously energised and functioning, but it seems like the driver is not linking to it. Is there something else I have yet to do, like "loading" or "mounting" the driver? I will appreciate your expert council. So this is where I am now with this marathon! Coupled with this registration failure in Ekiga 2.0.11, mentioned at the beginning of this message. So I remain in need of your most kind help. One final point, when I click on the "Test Video Device" button in the Druid, the tests 0 thro` 4 are completed satisfactorily and test 5 commences, but quits immediately - if that is any help. Regards, Ian Murdoch. _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
