Le dimanche 30 décembre 2007 à 13:04 -0800, Christopher Dick a écrit : > I am running two boxes with OpenSuSE 10.3 32-bit. I > installed Ekiga 2.0.11 on both of them, and registered > SIP accounts with Ekiga as well. > > I used the [EMAIL PROTECTED] to test connectivity for both > boxes, and everything seemed to be working fine. > > I opened a PC-to-Phone account, and that seems to work > just fine, too. > > These two machines are on a LAN together (at the > moment). I used the STUN settings, as the firewall > was detected as "Port restricted NAT" and recommended > it. > > I can call the other machine using the accounts I > created, and the call seems to go through. However, > no video or audio is transmitted in a detectable form. > If I "dial" directly to the other machine's IP > address, the call seems to go through, but again, no > sound or video. > > What should I look for as far as packages installed > and/or setting I should look for? Any ideas?
When using the IP address, do you use the internal IP address ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
