Windows or linux or both? Clean settings - remove software and start again?
On Wed, 2008-01-02 at 22:31 +0100, Damien Sandras wrote: > There is something severely broken with your setup. > > Every PDU you send is sent back to you ! > > Please start from clean settings... > > Le mercredi 02 janvier 2008 à 21:27 +0000, Ed McDonagh a écrit : > > Apologies if you get this twice - the first version was too big, so I am > > trying with a smaller version - I hope the moderator deletes the first! > > > > -------- Forwarded Message -------- > > From: Ed McDonagh <[EMAIL PROTECTED]> > > To: Ekiga mailing list <[email protected]> > > Subject: Re: [Ekiga-list] Windows/Linux: won't send video > > Date: Wed, 02 Jan 2008 21:13:34 +0000 > > > > On Wed, 2008-01-02 at 12:49 +0100, Damien Sandras wrote: > > > Hi, > > > > > > Le mercredi 02 janvier 2008 à 00:05 +0000, Ed McDonagh a écrit : > > > > Hi > > <snip> > > > > > > > > Versions: > > > > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > > > > version 2.0.11 > > > > Video is using V4L2 plugin. > > > > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > > > > > > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > > > > Video is using VideoForWindows plugin (same behaviour for DirectShow). > > > > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > > > > > > > Problem details: > > > > If the call is initiated from linux, windows offers to accept the call, > > > > and the connection seems to work. However, you only see the local video. > > > > In the Windows Ekiga General History it says (among other things, > > > > including stuff about opening speex) > > > > Opened codec H261 for transmission > > > > Opened codec H261 for reception > > > > Then about 30 seconds later it says > > > > Closed codec H261 which was opened for transmission > > > > Closed codec H261 which was opened for reception > > > > (and the same for SPEEX). > > > > Remote user is unreachable > > > > > > > > As far as the linux general history is concerned, the call is still open > > > > no problem! > > > > > > > > If the call is initiated from Windows, the general history log in > > > > windows says that the Remote user rejected the call. In reality, linux > > > > never comes up with an accept/reject option :-( > > <snip> > > > > > > > > > > You should upload debug 4 outputs for both sides so that we can > > > determine what happens. > > > > > > Before doing that, please ensure that both Ekiga installations can > > > successfully run the echo test on ekiga.net. > > > -- > > > _ Damien Sandras > > > > Thank you Damien and Stefan. > > > > I have successfully run the echo test for both laptops(audio and video, > > linux and windows), and I am quite excited about the framerate/image > > quality control, which along with the control of max bandwidth control > > is going to be great! > > > > I presume this rules out a firewall issue? At the moment, both computers > > are on the same wlan, which is useful for testing. However, in real use > > the computers are going to be on opposite sides of the country. > > > > I have attached the debug from linux, and the stderr from windows. The > > stderr doesn't seem to contain much, and the stdout and the 'x' file are > > both empty. However, the linux file seems to have lots in. > > > > The behaviour described yesterday has swapped today, with a call started > > on linux never connecting, and a call starting on Windows connects, but > > quits after half a minute or so on linux. > > > > In the log, I have done as above. The first call is initiated on linux > > from ed.mcdonagh to hilary.sutherland. Windows never receives the call. > > > > The second call is initiated from Windows, and accepted on linux. The > > video is never transmitted either way (voice is harder to tell when they > > are both on my lap!) and the call is terminated by linux after half a > > minute or so. Windows doesn't know the call has stopped. > > > > Thanks. > > > > Ed > > _______________________________________________ > > ekiga-list mailing list > > [email protected] > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:[EMAIL PROTECTED] > > > _______________________________________________ > ekiga-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/ekiga-list _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
