Le jeudi 20 mars 2008 à 10:25 -0700, Roderick A. Anderson a écrit : > Good morning to all. > > Sorry to have not lurked longer before asking questions. I have done > some searching of the archives but, probably due to a wrong concept, > used the wrong terms. > > Basically I do not hear anything when I press the dial-pad keys and it > appears nothing is sent to the system I am connected-to/registered-with. > > Fluff. I have X-Lite (Linux) working. > > Background. CentOS 5, Ekiga 2.0.2. Alsa sound drivers, > > I had this problem when I first installed Ekiga. Then I tried X-Lite to > make sure it was not a sound/mic hardware issue. When I started Ekiga > again it worked fine. In a moment of 'superior grade stupid' I tried to > clean-up the Ekiga installation by un-installing, killing the conf file > and reinstalling. (Can not remember why I thought the clean-up was > necessary but at the time there seemed to be a reason.) > > > Any ideas as to why there would be no tones transmitted?
Perhaps the remote end does not support RFC2833 but another way to transmit tones. X-Lite would support the other method and not Ekiga 2.0. Notice also that your release is a bit outdated, I would try upgrading Ekiga. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
