Hi Matthias, Thank you for investigating this issue further.
Yes, I could compile ekiga from sources. I did this earlier with 3.0.1. It took me a while to track down all the needed libraries, but I eventually made a working version. Regards, Michael On Wed, Dec 03, 2008 at 07:27:29AM +0000, Matthias Schneider wrote: > Hi Michael, > > I have been trying to reproduce your issue but still no "luck". I enabled my > camera, > closed the call panel, left ekiga, unplugged the cam and restarted ekiga - > still no 100% CPU. > Probably it seems this issue only appears with certain display drivers and/or > camera drivers? > Maybe we will have to run an instrumented version on your PC. Do you think > you could compile > ekiga from the sources? > > Matthias > > > > ----- Ursprüngliche Mail ---- > > Von: Michael Ashley <[EMAIL PROTECTED]> > > An: Ekiga mailing list <[email protected]> > > Gesendet: Mittwoch, den 26. November 2008, 22:28:44 Uhr > > Betreff: Re: [Ekiga-list] ekiga pegs the CPU if started with the camera > > device turned off > > > > Damien, > > > > > If there is no debug output, do you also reach 50% CPU in the same > > > situation ? > > > > Yes. The CPU usage isn't just due to the last number of debug > > messages. > > > > In fact, I see ekiga and Xorg together using up about 100% of the > > CPU. The proportion used by each varies a little bit depending on > > whether the debug output is on. > > > > Regards, Michael > > _______________________________________________ > > ekiga-list mailing list > > [email protected] > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > _______________________________________________ > ekiga-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/ekiga-list _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
