On Wed, Dec 10, 2008 at 9:59 AM, Fedor vonBock <[EMAIL PROTECTED]> wrote: > Hello, > > I have successfully compiled and run ekiga (albeit with admin > privilege). However, I am not able to connect. The bar below has the > message (could not register sip:<username>@ekiga.net. > > I am behind a US robotics router and i want to know if that's significant.
There are lots of issues with being behind routers doing NAT. It is not possible to tell from the information you gave which specific one applies to your case -- US Robotics makes many different models and any specific model could be configured in a myriad of ways. Ekiga handles many of the issues pretty well by using STUN. You need to run the Configuration Assistant[0] to see what information it can tell you about what type of NAT you may be experiencing. See the wiki [1] for more information on NAT specifically. Good luck and ask on the list again if you still have trouble after experimenting and reading a bit. 0. http://wiki.ekiga.org/index.php/Configuring_Ekiga 1. http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router Best wishes, Oisin Feeley _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
