Are you sure? As I am using the ekiga wiki examples, the incoming works as
described but the outgoing is confusing to me as its not clear to follow the
example in the outgoing section of the ekiga wiki help.> From:
[email protected]> To: [email protected]> Date: Thu, 25 Dec 2008 11:53:02
+0100> Subject: Re: [Ekiga-list] Unable to get incoming calls from sip
provider ekiga.net set up on asterisk> > I suppose you should ask this
question on the Asterisk mailing list ?> > Le mercredi 24 décembre 2008 à 21:50
+0000, FS Inc. a écrit :> > *bump*> > > > > >
______________________________________________________________________> > From:
[email protected]> > To: [email protected]> > Date: Thu, 18 Dec 2008
00:39:46 +0000> > Subject: [Ekiga-list] Unable to get incoming calls from sip
provider> > ekiga.net set up on asterisk> > > > I've been using the wiki as a
guide here...> > > >
http://wiki.ekiga.org/index.php/Connecting_Asterisk_to_ekiga.net> > > > I've
also tried various permutations, combinations and contortions but> > nada.> > >
> below is my extensions.conf> > > > ***** begin extensions.conf ****> >
[general]> > static = yes> > writeprotect = no> > autofallthrough = yes> >
clearglobalvars = no> > > > [globals]> > CONSOLE = Console/dsp ; Console
interface for demo> > ;CONSOLE=Zap/1> > ;CONSOLE=Phone/phone0> > IAXINFO =
guest ; IAXtel username/password> > ;IAXINFO=myuser:mypass> > TRUNK = Zap/G2
; Trunk interface> > TRUNKMSD = 1 ; MSD digits to strip (usually 1 or 0)> >
;TRUNK=IAX2/user:p...@provider> > > > [default]> > exten =>
s,1,Verbose(1|Unrouted call handler)> > exten => s,n,Answer()> > exten =>
s,n,Wait(1)> > exten => s,n,Playback(tt-weasels)> > exten => s,n,Hangup()> > >
> [macro-voicemail]> > exten => s,1,Dial(${ARG1},20)> > exten =>
s,n,Goto(s-${DIALSTATUS},1)> > exten =>
s-NOANSWER,1,Voicemail(u${MACRO_EXTEN})> > exten => s-NOANSWER,n,Hangup()> >
exten => s-BUSY,1,Voicemail(b${MACRO_EXTEN})> > exten => s-BUSY,n,Hangup()> >
exten => _s-.,1,Goto(s-NOANSWER,1)> > > > [incoming_calls]> > exten =>
ekiga_meyamma_in,1,Macro(voicemail,SIP/101)> > exten =>
ekiga_meyamma_in,n,Hangup()> > > > [internal_calls]> > exten =>
101,1,Macro(voicemail,SIP/101)> > exten => 101,n,Hangup()> > exten =>
102,1,Dial(SIP/102)> > exten => 102,n,Hangup()> > exten =>
8,1,VoiceMailMain(s${CALLERIDNUM})> > exten => 8,n,Hangup()> > exten =>
600,1,Answer()> > exten => 600,n,Playback(demo-echotest)> > exten =>
600,n,Echo()> > exten => 600,n,Playback(demo-echodone)> > exten =>
600,n,Hangup()> > > > [outgoing_calls]> > exten =>
_9.,1,Dial(SIP/ekiga_meyamma_out/${EXTEN:1},20,r))> > exten => _9.,n,Hangup()>
> > > [home]> > include => internal_calls> > include => outgoing_calls> > *****
end extensions.conf ****> > > > below is my sip.conf> > > > **** begin sip.conf
***> > [general]> > context=default > > bindport=5060
> > > > bindaddr=0.0.0.0
> > srvlookup=yes > > > >
disallow=all > > allow=ulaw > >
allow=alaw> > allow=ilbc > > allow=gsm> > allow=h261> > > >
videosupport=yes > > > > ; Register 2345 at sip provider
'sip_proxy'. Calls from this> > provider> > ; connect to local extension
1234 in extensions.conf, default> > context,> > ; unless you configure a
[sip_proxy] section below, and configure a> > ; context.> > ; Tip 1:
Avoid assigning hostname to a sip.conf section like> > [provider.com]> > ;
Tip 2: Use separate type=peer and type=user sections for SIP> > providers> > ;
(instead of type=friend) if you have calls in both> > directions> >
register => meyamma:[email protected]/ekiga_meyamma_in> > > >
externhost=fspublic.selfip.com > > externrefresh=10 ;> >
localnet=192.168.1.0/255.255.255.0> > > > [authentication]> > > > > > ;setup> >
[101]> > type=friend> > username=101> > secret=welcome> > qualify=yes > >
nat=no > > host=dynamic > > canreinvite=no > > context=home> >
;port=5061 > > > > ;setup> > [102]> > type=friend> > username=102> >
secret=welcome> > qualify=yes > > nat=no > > host=dynamic > >
canreinvite=no > > context=home> > ;port=5061 > > > > ;ekiga.net> >
[ekiga_meyamma_out]> > type=peer> > username=meyamma> > secret=meyamma> >
host=ekiga.net> > canreinvite=no> > qualify=300> > insecure=port,invite> > > >
;ekiga.net> > [ekiga_meyamma_in]> > type=user> > username=meyamma> >
secret=meyamma> > host=ekiga.net> > canreinvite=no> > qualify=300> >
context=incoming_calls> > insecure=port,invite> > **** end sip.conf ****> > > >
These are the latest incantations of my sip and extensions conf files.> > Can
anyone assist in helping me to get incoming calls from ekiga.net> > set up. I
have the outgoing working as that was the simple part.> > That one is handled
by [ekiga_meyamma_out] and [outgoing_calls].> > > > Thanks a mil> > > > > >
______________________________________________________________________> >
Explore the seven wonders of the world Learn more!> > > >
______________________________________________________________________> > check
out the rest of the Windows Live™. More than mail–Windows Live™> > goes way
beyond your inbox. More than messages> >
_______________________________________________> > ekiga-list mailing list> >
[email protected]> > http://mail.gnome.org/mailman/listinfo/ekiga-list> -- >
_ Damien Sandras> (o- > //\ Ekiga Softphone :
http://www.ekiga.org/> v_/_ Be IP : http://www.beip.be/>
FOSDEM : http://www.fosdem.org/> SIP Phone :
sip:[email protected]> > >
_______________________________________________> ekiga-list mailing list>
[email protected]> http://mail.gnome.org/mailman/listinfo/ekiga-list
_________________________________________________________________
Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.
http://www.microsoft.com/windows/windowslive/photos.aspx
_______________________________________________
ekiga-list mailing list
[email protected]
http://mail.gnome.org/mailman/listinfo/ekiga-list
