> I set it to 3600 in gconf > (sip:registrar_registration_timeout as well as in > accounts_list) but it seems that both settings are > ignored? The log still says 36000. Is there a > separate settings at ekiga.net? Is there a way > for me to set it? >
Sorry for my monologue... It turned out that the gconf settings were applied with delay. I tried both 3600 and 600 but the problem persists with the same behaviour - all communication is halted after some time. The network consists of Zyxel ADSL modem bridged to WRT54GL router running Tomato firmware. Using or not using port forwarding does not play a role either. Full log using registration time of 600 is here: ftp://quacka.no-ip.org/pub/ekiga.log.7z (.tgz is available at the same location if preferred) It could still be a NAT issue but it would be bit weird because there is a SIP hardphone connected to the same router and it works without any problems with two SIP (non-Ekiga) accounts... so I really don\'t know what is going on here at the moment! Palo __________ http://www.pnp.sk - pridajte svoje fotky na PaciNepaci _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
